Threaded Plugs

DIN 906 THREADED PLUGS ARE USED TO CLOSE BORE HOLES WITH CYLINDRICAL TAPERED INTERNAL THREAD. THE TIGHTNESS DEPENDS ON THE MEDIUM PRESSURE TEMPERATURE AND MATERIAL PAIRING.

THREADED PLUGS CAN BE USED AS A SPRING RETENTION UNIT AS SHOWN ABOVE OR AS A PLUG TO KEEP DEBRIS FROM ENTERING INTO A CRITICAL THREADED AREA.

GN 749 THREADED PIPE PLUGS SEAL IS RETAINED IN A GROOVE UNDERCUT IN THE MATING FACE WHICH PREVENTS IT FROM DROPPING OUT AND FROM EXTRUDING WHEN THE PLUG IS TIGHTENED. FOR THIS REASON THE SEAL CAN BE OF A SOFTER MATERIAL WHICH OFFERS BETTER SEALING.

DIN 906 THREADED PLUGS ARE USED TO CLOSE BORE HOLES WITH CYLINDRICAL TAPERED INTERNAL THREAD. THE TIGHTNESS DEPENDS ON THE MEDIUM PRESSURE TEMPERATURE AND MATERIAL PAIRING.

MAXIMUM HEAT RESISTANCE OF NYLON PLASTIC 194° F (90° C). COMES COMPLETE WITH UNASSEMBLED OIL-RESISTANT SYNTHETIC RUBBER GASKETS.

DIN 906 THREADED PLUGS ARE USED TO CLOSE BORE HOLES WITH CYLINDRICAL TAPERED INTERNAL THREAD. THE TIGHTNESS DEPENDS ON THE MEDIUM PRESSURE TEMPERATURE AND MATERIAL PAIRING. THE DESIGN WITH GPC THREAD COATING PROVIDES A HIGHER DEGREE OF SAFETY.

DIN 906 THREADED PLUGS ARE USED TO CLOSE BORE HOLES WITH CYLINDRICAL TAPERED INTERNAL THREAD. THE TIGHTNESS DEPENDS ON THE MEDIUM PRESSURE TEMPERATURE AND MATERIAL PAIRING. THE DESIGN WITH GPC THREAD COATING PROVIDES A HIGHER DEGREE OF SAFETY.

GN 749 THREADED PIPE PLUGS SEAL IS RETAINED IN A GROOVE UNDERCUT IN THE MATING FACE WHICH PREVENTS IT FROM DROPPING OUT AND FROM EXTRUDING WHEN THE PLUG IS TIGHTENED. FOR THIS REASON THE SEAL CAN BE OF A SOFTER MATERIAL WHICH OFFERS BETTER SEALING.

GN 749 THREADED PIPE PLUGS SEAL IS RETAINED IN A GROOVE UNDERCUT IN THE MATING FACE WHICH PREVENTS IT FROM DROPPING OUT AND FROM EXTRUDING WHEN THE PLUG IS TIGHTENED. FOR THIS REASON THE SEAL CAN BE OF A SOFTER MATERIAL WHICH OFFERS BETTER SEALING.

DIN 906 THREADED PLUGS ARE USED TO CLOSE BORE HOLES WITH CYLINDRICAL TAPERED INTERNAL THREAD. THE TIGHTNESS DEPENDS ON THE MEDIUM PRESSURE TEMPERATURE AND MATERIAL PAIRING.

DIN 906 THREADED PLUGS ARE USED TO CLOSE BORE HOLES WITH CYLINDRICAL TAPERED INTERNAL THREAD. THE TIGHTNESS DEPENDS ON THE MEDIUM PRESSURE TEMPERATURE AND MATERIAL PAIRING.

MAXIMUM HEAT RESISTANCE OF NYLON PLASTIC 194° F (90° C). COMES COMPLETE WITH UNASSEMBLED OIL-RESISTANT SYNTHETIC RUBBER GASKETS.

GN 749 THREADED PIPE PLUGS SEAL IS RETAINED IN A GROOVE UNDERCUT IN THE MATING FACE WHICH PREVENTS IT FROM DROPPING OUT AND FROM EXTRUDING WHEN THE PLUG IS TIGHTENED. FOR THIS REASON THE SEAL CAN BE OF A SOFTER MATERIAL WHICH OFFERS BETTER SEALING.

GN 749 THREADED PIPE PLUGS SEAL IS RETAINED IN A GROOVE UNDERCUT IN THE MATING FACE WHICH PREVENTS IT FROM DROPPING OUT AND FROM EXTRUDING WHEN THE PLUG IS TIGHTENED. FOR THIS REASON THE SEAL CAN BE OF A SOFTER MATERIAL WHICH OFFERS BETTER SEALING.

GN 749 THREADED PIPE PLUGS SEAL IS RETAINED IN A GROOVE UNDERCUT IN THE MATING FACE WHICH PREVENTS IT FROM DROPPING OUT AND FROM EXTRUDING WHEN THE PLUG IS TIGHTENED. FOR THIS REASON THE SEAL CAN BE OF A SOFTER MATERIAL WHICH OFFERS BETTER SEALING.

GN 742 FILL/DRAIN PLUGS ARE FITTED WITH OUTSIDE DIAMETER D1 TO FIT SCREW HOLES WITH BSP THREADS INCLUDED IN DIN 3852. THE SEAL IS RETAINED IN A GROOVE UNDERCUT IN THE MATING FACE WHICH PREVENTS IT FROM DROPPING OUT AND FROM EXTRUDING WHEN THE PLUG IS...