PERLE SYSTEMS 05050034 Perle S-1000-S2SC10 - Fiber media converter - GigE - 1000Base-LX, 1000Base-LH, 1000Base-T - RJ-45 / SC single-mode - up to 6.2 miles - 1310 nm
PERLE SYSTEMS 05050034 Perle S-1000-S2SC10 - Fiber media converter - GigE - 1000Base-LX, 1000Base-LH, 1000Base-T - RJ-45 / SC single-mode - up to 6.2 miles - 1310 nm
PERLE SYSTEMS 05050034 Perle S-1000-S2SC10 - Fiber media converter - GigE - 1000Base-LX, 1000Base-LH, 1000Base-T - RJ-45 / SC single-mode - up to 6.2 miles - 1310 nm
Previous Next

PERLE SYSTEMS

PERLE SYSTEMS 05050034 Perle S-1000-S2SC10 - Fiber media converter - GigE - 1000Base-LX, 1000Base-LH, 1000Base-T - RJ-45 / SC single-mode - up to 6.2 miles - 1310 nm

0 review Write a Review
Default operating mode. In the default operating mode (all switches up), the media converter will auto-negotiate on both the fiber and the copper links at the s…
SKU:
05050034
UPC:
734660500340
Condition:
New
Weight:
1.15 LBS
Minimum Purchase:
1 unit
Shipping:
Calculated at Checkout
Unit of Measure:
EA
QPU:
1
Country of Origin:
CA
UNSPSC Code:
43201553
UNSPSC Commodity:
Transceivers and media converters
Model No:
S-1000-S2SC10
DEPT:
PC ACCESSORIES
CLASS:
SURGE/CABLES / NETWORK CABLE/ACC
$842.33
Hurry up! Current stock:
Product Details  
Default operating mode. In the default operating mode (all switches up), the media converter will auto-negotiate on both the fiber and the copper links at the same time, thus achieving the best end-to-end Ethernet operating parameters. Error recovery. In certain configurations, and under specific conditions where the media converter brings down a link to convey status, there is potential for a deadlock. Recovery is achieved by momentarily restoring the link to see if the original failure has been resolved. Status LED. The Perle gigabit media converters have three single color status LEDs located on the front panel of the unit. Auto-MDI-X with skew correction. Auto-MDI-X (automatic medium-dependant interface crossover) detects the signaling on the 1000BASE-T interface to determine the type of cable connected (straight-through or crossover) and automatically configures the connection.

Customers Also Viewed