Mitutoyo

Digimatic Depth Gage, with SPC Output; Gage, Dig, 0-18"/0-450 mmFeaturesBase and measuring faces are hardened and micro-lappedOptional wider extension base availableSPC data output

Digital Indicators ID-S Solar, 0.5 in; 0.0005 in Resolution, Lug BackFeaturesEmploying the ABSOLUTE linear encoder, the Signal ID-S always displays the spindle "Absolute Position" from the origin...

Digital Indicators ID-S Solar, 0.5 in; Lug BackFeaturesEmploying the ABSOLUTE linear encoder, the Signal ID-S always displays the spindle "Absolute Position" from the origin at power-onUnlimited...

Digital Indicators ID-S Solar, 0.5 in; M2.5 x 0.45 Thread, Flat BackFeaturesEmploying the ABSOLUTE linear encoder, the Signal ID-S always displays the spindle "Absolute Position" from the origin at...

Digital Indicators ID-S Solar, 12.7 mm Range, Lug BackFeaturesEmploying the ABSOLUTE linear encoder, the Signal ID-S always displays the spindle "Absolute Position" from the origin at...

Edge Finder, 1/2 in Shank, .200 in TipFeaturesHardened and ground on all surfaces

Edge Finder, 3/8 in Shank, .200 in TipFeaturesHardened and ground on all surfaces

Height Gage, Standard Type, 18", .0005"/.0002", with Output; Height Gage, DigFeaturesDouble-column structure ensures high measuring accuracyCoarse/fine feed switchingSwitchable resolution and two...

Hermaphrodite Calipers, 0 in-4 in, Hardened SteelFeaturesMade of high-quality carbon steelMade with a brushed steel finish

IDU Flat-Back Digimatic Indicator, 1 in; 25.4 mm RangeFeaturesSlim type digital indicator with low priceLarge LCD and simple key operationIdeal for installation into measuring devices because of it's...

Inspection Gage Block Set, In., ASME Grade AS-1, 9 Blocks; 9-Pc Set, Rect, SteelFeaturesCan be measured in both vertical and horizontal postureParallelism is measured by attaching the optical...

M1-M6 Anvil-Spindle Tip Sets, 60 Degree ThreadsFeaturesSet includes Optio l anvils with 60-degree threadsEach anvil can be used for both metric and unified exter l threadsThe micrometer anvil is...

Mic set, Outside, 0-12"FeaturesSupplied in a fitted plastic caseSturdy

Micrometer Stand for Micrometers up to 4 in; Mic Stand, 0-4"FeaturesDesigned to allow benchtop use with hand micrometers or other gages

PRO-3600 Digital Protractors, RS232C OutputFeaturesFull 360° rangeReading hold