Mig Welding

No. 2 Traditional Style MIG Guns, 10 ft, Miller, 0.04 in - 0.045 in WireFeaturesIndustry standardMetal jacket conductor tubeEnhanced direct plug capabilities

No. 4 Air Cooled MIG Guns, 400 A, 25 ft, Euro-Kwik, 0.035 - 0.045 in WireFeaturesWide selection of front end consumables available to fit the needs of the applicationIndustry standard for 40+ years, oval shaped handle reduces grip required to manipulate...

No. 4 Air Cooled MIG Guns, 400 A, 15 ft, Euro-Kwik, 1/16 in WireFeaturesWide selection of front end consumables available to fit the needs of the applicationIndustry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun...

Eliminator Style Nozzles, 1/8 in. Tip Recess Thread On, 3/4 inFeaturesUsed for higher heat applications where longer electrical stick-out is requiredGood for applications where the nozzle may touch the work piece (tack, spot, and stitch)

Heavy Duty Contact Tip, 0.048 in Tip, TW 14H-40FeaturesEasy identification - Each contact tip is marked showing Part No. and wire diameterExcellent electrical propertiesInside diameter tolerance is held to +/-.003 inMachined from a copper alloy tubing...

MIG Torch Gun Diffusers, For Mini-MIG GunFeaturesFor traditional style gunsReliable

Heavy Duty Contact Tip, 0.03 in Wire, 0.03 in Tip, Optional Heavy DutyFeaturesEasy identification - Each contact tip is marked showing Part No. and wire diameterExcellent electrical propertiesInside diameter tolerance is held to +/-.003 inMachined from a...

Contact Tip, 3/64 in Wire, 0.059 in Tip, Standard HDFeaturesFor traditional & Spray Master™ gunsExcellent electrical propertiesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surface

Air Cooled MIG Guns, 250 A, 15 ft, Tweco, 7/200" - 9/200" WireFeaturesThick-walled, three-layer conductor tube for higher electrical conductivity, act as “heat sink”Heavy-duty thick-walled contact tip and diffuser increases tip life and decreases...

24 Series Nozzle, Coarse Thread, 1/8 in. Tip Recess, 5/8 in Bore, For No. 4 Gun, Copper AlloyFeaturesUsed in heavy duty welding application up to 450 amperesEasy identification, Part No. rolled stamped on the outside surface3-piece design, does not...

Eliminator Style Nozzles, 1/8 in. Tip Recess Thread On, 3/8 inFeaturesUsed for higher heat applications where longer electrical stick-out is requiredGood for applications where the nozzle may touch the work piece (tack, spot, and stitch)

MIG Welding Liners, 0.045 in x 15 ft, For 200 & 300A GunsFeatures100% tested prior to shipment to ensure smoothest wire feedLiners won't gap when bentQuick and simple replacement without gas

Robotics Conduit Liners, 0.052in-1/16in x 8ft, 300A-450AFeaturesZinc plated spring wire to minimize corrosion on the metal surfaceEach wire conduit has a brass alloy machined stop on the back endDesigned to be used with robotic and fixed automation MIG...

MIG Jump Liners, For Q-Gun/Mig GunsFeaturesCenterfire consumable series Contact Tips, Gas Diffusers, Nozzles, and Tapered Contact Tips are machined to the highest quality for extended service lifeAdapter Heads and Insulator Caps are available to convert...

Robotics Conductor Tubes, WRS64-45, 400A, 45°, Water-CooledFeaturesStainless steel outer jacket insulated from the inner tube by a PTFE sleeve providing excellent di-electric propertiesOuter jacket contains a nozzle housing with a thermally conductive...

Wire Conduits, 0.04 in-0.045 in x 15 ftFeaturesFor all guns (Eliminator®, Traditional and Spray Master™ styles)Tweco Universal Conduit liner is ready to use right out of the boxEach conduit liner wire has a crimped wire guide that is universal common to...