THE HEATER OF CHOICE IN THE BOATING INDUSTRY. THIS IS THE ONLY ELECTRIC HEATER SPECIFICALLY DESIGNED TO BE USED IN MARINE APPLICATIONS. IT HAS ALL THE GREAT FEATURES OF THE PIC-A-WATT® HEATER (INCLUDING A STAINLESS STEEL GRILL WALL CAN AND INTERIOR) ENABLING IT TO STAND UP TO THE CORROSIVE ENVIRONMENT ON SALTWATER BOATS. THE WALL CAN IS FLANGED FOR RECESS MOUNTING INTO A WOOD BULKHEAD. CONSULT FACTORY OR REVIEW CATALOG FOR OTHER MODELS INCLUDING A HIGH-EFFICIENCY MOTOR AND A DIAL-A-WATT® SWITCH ALLOWING YOU TO CHANGE THE WATTAGE WITH A GRILL-MOUNTED SELECTOR SWITCH. STAINLESS STEEL PAW SERIES THE HEATER OF CHOICE IN THE BOATING INDUSTRY. THIS IS THE ONLY ELECTRIC HEATER SPECIFICALLY DESIGNED TO BE USED IN MARINE APPLICATIONS. THE WALL CAN IS FLANGED FOR RECESS MOUNTING INTO A WOOD BULKHEAD. CORROSIVE SALTWATER. NO PROBLEM THE STAINLESS STEEL CONSTRUCTION ENABLES IT TO STAND UP TO THE CORROSIVE ENVIRONMENT ON SALTWATER BOATS. CONTRACTOR SHALL SUPPLY AND INSTALL PAW STAINLESS STEEL SERIES IN-WALL MOUNTED FORCED-AIR ELECTRIC HEATERS MANUFACTURED BY KING ELECTRICAL MFG. COMPANY. HEATERS SHALL BE OF THE WATTAGE AND VOLTAGE AS INDICATED ON THE PLANS. CONSTRUCTION CONTRACTOR SHALL SUPPLY AND INSTALL PAW STAINLESS STEEL SERIES IN-WALL MOUNTED FORCED-AIR ELECTRIC HEATERS MANUFACTURED BY KING ELECTRICAL MFG. COMPANY. HEATERS SHALL BE OF THE WATTAGE AND VOLTAGE AS INDICATED ON THE PLANS. BLOWER AND MOTOR A TANGENTIAL CYLINDRICAL BLOWER DELIVERING 65 CFM SHALL BE DRIVEN BY A SHADED POLE PERMANENTLY LUBRICATED C-FRAME TYPE MOTOR WITH IMPEDANCE PROTECTION AND SEALED BEARINGS. MOTORS SHALL BE THE SAME VOLTAGE AS THE HEATER. ELEMENTS ELEMENT ASSEMBLIES SHALL CONSIST OF THREE STEEL SHEATHED HEATING TUBES IN A FURNACE-BRAZED PLATE-FINNED BLOCK DESIGN. EACH SHEATHED TUBE SHALL CONTAIN COILED NI-CHROME WIRE EMBEDDED IN AN INSULATOR OF MAGNESIUM OXIDE. THE ELEMENT ASSEMBLY SHALL PROVIDE UP TO SEVEN (7) POSSIBLE WATTAGE CONFIGURATIONS AVAILABLE FOR SELECTION D
US Dollars
