Faucet Repair Kits

Corner Radius End Mill: 6 mm Dia, 13 mm LOC, 4 Flutes, Solid Carbide AlTiN Coated, Centercutting

Barrel Cutter End Mills; End Type: Taper Form ; Material: Solid Carbide ; Taper Angle Per Side: 45.00 ; Length of Cut (Inch): 5/16 ; Finish Coating: AlTiN+ ; Shank Diameter (Inch): 5/8

Square End Mill: 3/4'' Dia, 4'' LOC, 3/4'' Shank Dia, 6-1/4'' OAL, 2 Flutes, High Speed Steel Single End, Uncoated, Spiral Flute, 42 ° Helix, Centercutting, RH Cut, RH Flute

Square End Mill: 1-7/8" Dia, 1-5/8" LOC, 2 Flutes, High Speed Steel 4-1/8" OAL, 1-1/4" Shank Dia, 30 ° Helix, Single End, Bright/Uncoated

Square End Mill: 0.053" Dia, 0.159" LOC, 2 Flutes, Solid Carbide 1-1/2" OAL, 1/8" Shank Dia, 30 ° Helix, Single End, Bright/Uncoated

Corner Radius End Mill: 1" Dia, 1-1/4" LOC, 37 deg Helix, Corner Radius End, Centercutting 5" OAL, ZrN Coated, Corner Radius End, Centercutting

Corner Radius End Mill: 3/4" Dia, 1" LOC, 38 deg Helix, Corner Radius End, Centercutting Series HS 6" OAL, AlCrTiN Coated, Corner Radius End, Centercutting, Series HS

Square End Mill: 1'' Dia, 1'' LOC, 1'' Shank Dia, 3'' OAL, 4 Flutes, Solid Carbide Single End, TiAlN Finish, Spiral Flute, Centercutting, RH Cut, RH Flute, Series C430

Square End Mill: 3/4'' Dia, 1-1/2'' LOC, 3/4'' Shank Dia, 4'' OAL, 4 Flutes, Solid Carbide Single End, TiAlN Finish, Spiral Flute, Mfr Grade Submicron Grain, Centercutting, RH Cut, RH Flute

Corner Radius End Mill: 0.078" Dia, 0.117" LOC, 0.5 mm Radius, 3 Flutes, Solid Carbide 2-1/2" OAL, 1/8" Shank Dia, 30 ° Helix, AlTiN Coated, Single End, Series Miniature End Mills - Corner Radius - Long Reach, Stub Flute

Corner Radius End Mill: 3/4" Dia, 3" LOC, 1/8" Radius, 4 Flutes, Solid Carbide 6" OAL, 3/4" Shank Dia, 38 ° Helix, TiAlCN Coated, Single End, Centercutting

Square End Mill: 1/4" Dia, 1-1/4" LOC, 5 Flute, Solid Carbide 3" OAL, 1/4" Shank Dia, 38 deg Helix, AlTiCrN Coated, Single End, Series HS

Corner Radius End Mill: 5/8" Dia, 3/4" LOC, 0.0300" Radius, 4 Flute, Solid Carbide 3" OAL, 5/8" Shank Dia, APLUS Coated, Single End, Centercutting, Series HSVR-C-4

Ball End Mill: 0.3125" Dia, 0.8125" LOC, 3 Flute, Solid Carbide 2-1/2" OAL, 5/16" Shank Dia, 30 ° Helix, AlTiN Coated, Single End, Series B-330

Square End Mill: 5/32" Dia, 15/32" LOC, 5 Flute, Solid Carbide 2-1/4" OAL, 5/32" Shank Dia, 40 deg Helix, EXO Coated, Single End, Series VGM5

Corner Radius End Mill: 5/8" Dia, 1-1/4" LOC, 0.03" Radius, 4 Flutes, Solid Carbide 3-1/2" OAL, 5/8" Shank Dia, Variable Helix, TiAlN Coated, Single End, Centercutting, Series VG434