Workstation & Personal Heaters

Taper Shank Drill Bit: 0.8594" Dia, 3MT, 118 °, Cobalt Bright/Uncoated, 11.5" OAL, Standard Point, Spiral Flute

Taper Length Drill Bit: 0.6406" Dia, 135 ° TiAlN Finish, RH Cut, Spiral Flute, Straight Shank, Series EF-DRILL

Taper Shank Drill Bit: 1.1811" Dia, 3MT, 130 °, High Speed Steel Bright/Uncoated & Oxide, 12.0079" Flute Length, 18.1102" OAL, Special Point, Parabolic Flute

Rotary Broach

Countersink: 60 ° Included Angle, 3 Flutes, High Speed Steel, Right Hand Cut 2-1/2" Max Cut Dia, 190 mm OAL

Taper Length Drill Bit: 0.7087" Dia, 135 ° Bright/Uncoated, 5.315" Flute Length, RH Cut, Spiral Flute, Weldon Shank

Taper Length Drill Bit: 0.6330" Dia, 132 ° TiAlN Finish, 5.315" Flute Length, 7.2835" OAL, RH Cut, Spiral Flute, Straight Shank, Series B978

Solid Pilot Counterbore Sets

Core Drill: 2-3/16" Dia, 5MT, 118 °, High Speed Steel Oxide Finish, 10-1/4" Flute Length, 17-3/8" OAL

Taper Pin Reamer: 40 mm Pin, 1.5642" Small End, 1.8321" Large End, High Speed Steel 13.3858" Flute Length, 16.9291" OAL, 1.5748" Shank Dia, 12 Flutes, Bright/Uncoated, Right Hand Cut

Keyway Broach Sets; Broach Style: D ; Minimum Bushing Diameter (Inch): 1-7/16 ; Maximum Bushing Diameter (Inch): 2-15/16 ; Keyway Broach Type: Keyway

Chucking Reamer: 40 mm Dia, 312 mm OAL, 152 mm Flute Length, Spiral Flute, Morse Taper Shank, High Speed Steel 10 Flutes, Right Hand Cut

Core Drill: 2-5/16" Dia, 5MT, 118 °, High Speed Steel Oxide Finish, 10-3/8" Flute Length, 17-3/8" OAL

1" x 24-1/8" Overall Length, 1-3/32" Pilot Hole Diam, Square Broach 1.002 to 1.003" Tolerance, 1.403 to 1.405" Across Corners, 7/16" Pitch, 5/8 to 2" LOC, 9,200 Lbs. Pressure for Max LOC

Keyway Broach: Style F, High Speed Steel, 24 mm Wide 1" Body Width, 1 to 6" Cutting Length, 20" OAL, Coated

Keyseating Broach: Style AF-S, High Speed Steel, 1" Wide 1" Body Width, 17/32 to 8" Cutting Length, 20" OAL, Bright