Welding & Cutting Machines

Compressed Air Filter Kit, 1/4 in (NPT), Sub-Micronic, For Use with Plasma MachinesFeaturesMount at point of use downstream of Motor Guard M-26/60 FilterRemoves oil vapor from air using activated carbonThe ultimate final filter for plasma cutters and...

Compressed Air Filter, 1/2 in (NPT), Sub-Micronic, For Use with Plasma MachinesFeaturesMount at point of use downstream of Motor Guard M-26/60 FilterRemoves oil vapor from air using activated carbonThe ultimate final filter for plasma cutters and other...

Cutmaster True Series 82 Plasma Cutting Systems, 80 A, 460 V, 1 1/2 in Cap.FeaturesAuto pilot restart, ATC® torch quick disconnect, and automatic voltage selectionThe microprocessor controlled front panel LED's assure extreme operator confidence and...

Cutmaster True Series 102 Plasma Cutting Systems, 100 A, 230 V, 1 3/4 in Cap.FeaturesAuto pilot restart, ATC® torch quick disconnect, and automatic voltage selectionThe microprocessor controlled front panel LED's assure extreme operator confidence and...

Filter Element, 1/2 in(NPT), For Use with Motorguard M30 and M60FeaturesIncreases the efficiency and tip life of plasma cutterRemoves moisture and oil aerosols from compressed air lineWill isolate particles as small as .01 microns

Compressed Air Filter, 1/4 in (NPT), Disposable In-Line Desiccant, For Use with Plasma MachinesFeaturesMount at point of use downstream of Motor Guard M-26/60 FilterRemoves oil vapor from air using activated carbonThe ultimate final filter for plasma...

Filter Elements, Carbon Max Replacement FilterFeaturesIncreases the efficiency and tip life of plasma cutterRemoves moisture and oil aerosols from compressed air lineWill isolate particles as small as .01 microns

Compressed Air Filters, 1/2"(NPT), Low Profile Air Control Unit Regulator/FilterFeaturesMount at point of use downstream of Motor Guard M-26/60 FilterRemoves oil vapor from air using activated carbonThe ultimate final filter for plasma cutters and other...

Cutmaster True Series 152 Plasma Cutters, 120 A, 230 V, 2 in Cap.FeaturesTRUE GUARD roll bar provides easy transportation and protects the front and rear of the power supply for unmatched durabilityColor Coded LED’s indicate pressure status and setup...

Compressed Air Filter, 1/4 in (NPT), Sub-Micronic, For Use with Plasma MachinesFeaturesMount at point of use downstream of Motor Guard M-26/60 FilterRemoves oil vapor from air using activated carbonThe ultimate final filter for plasma cutters and other...

Compressed Air Filters, 1/2 in (NPT), Carbon, Plasma MachinesFeaturesMount at point of use downstream of Motor Guard M-26/60 FilterRemoves oil vapor from air using activated carbonThe ultimate final filter for plasma cutters and other critical...

Fabricator 141i MIG/Stick/TIG Welder, 115 Volt Input PowerFeatures140 amps of MIG and TIG welding output and 90 amps of stick welding outputComes complete with 15 amp or 20 amp adapterIdeal for light duty and DIY MIG, Stick and DC TIG applicationsMIG...

Filter Elements, 40 Mic FilterFeaturesIncreases the efficiency and tip life of plasma cutterRemoves moisture and oil aerosols from compressed air lineWill isolate particles as small as .01 microns