Threading

HIGH SPEED STEEL TMX ADJUSTABLE ROUND SPLIT DIES. M22 X 1.0 HSS ISO METRIC TMX ROUND ADJUSTABLE DIE FINE THREAD 2"" OD. UL STYLE""MARGIN-TOP0PX; PADDING-TOP 5PX; PADDING-BOTTOM 5PX;"" PRECISION THREADS ARE ACCOMPLISHED THROUGH THE USE OF THE ADJUSTMENT...

ROUND DIE STOCK HANDLES UL STYLE""MARGIN-TOP0PX; PADDING-TOP 5PX; PADDING-BOTTOM 5PX;"" FOR HOLDING ADJUSTABLE ROUND SPLIT DIES THREE SET SCREW PATTERN BLACK FINISH SINGLE PIECE CONSTRUCTION

BRUBAKER TOOL 4174132 SPIRAL POINT TAP 1/4""-20 2 FLUTE H3 CHAMFER STYLE PLUG THESE TAPS ARE PRIMARILY DESIGNED FOR TAPPING THROUGH HOLES HOWEVER THEY CAN ALSO BE USED IN BLIND HOLES WHICH ARE DEEP ENOUGH TO ALLOW FOR CHIP ACCUMULATION IN THE BOTTOM...

SPIRAL POINT TAPS ARE USED FOR TAPPING THROUGH HOLES. THEY HAVE A FLUTE GEOMETRY THAT SHOOTS CHIPS AHEAD OF THE CUTTING ACTION TO REDUCE LOADING AND CLOGGING WITHIN THE FLUTE.

HIGH SPEED STEEL TMX SPIRAL POINT GROUND FLUTE HAND TAP AVAILABLE WITH A PLUG CHAMFER (3-5 THREAD LENGTH). # 6 - 32 H2 SPIRAL POINT PLUG CHAMFER HSS TMX TAP GROUND 2 FLUTES. UL STYLE""MARGIN-TOP0PX; PADDING-TOP 5PX; PADDING-BOTTOM 5PX;"" SPIRAL POINT...

SPIRAL POINTED TAP SPIRAL POINT TAPS HAVE AN ANGLED CUTTING FACE THAT FORCES MATERIAL CHIPS OUT AHEAD OF THE CUT AND A SHALLOWER FLUTE PASSAGE GIVING THEM MORE CROSS-SECTIONAL AREA. THIS OFFERS GREATER STRENGTH HIGHER TAPPING SPEEDS AND LESS POWER...

HIGH SPEED STEEL GROUND THREADS TMX HAND TAP WITH STRAIGHT FLUTES - AVAILABLE IN THREE CHAMFER STYLES TAPER CHAMFER HAS 8-10 THREAD CHAMFER LENGTH PLUG CHAMFER HAS 3-5 THREAD CHAMFER LENGTH AND BOTTOMING CHAMFER HAS 1-2 THREAD LENGTH. M30 X 3.5 D9...

HIGH SPEED STEEL GROUND THREADS TMX FAST SPIRAL HAND TAP WITH STRAIGHT FLUTES - AVAILABLE IN TWO CHAMFER STYLES PLUG CHAMFER HAS 3-5 THREAD CHAMFER LENGTH AND BOTTOMING CHAMFER HAS 1-2 THREAD LENGTH. 1/4 - 20 H3 FAST SPIRAL PLUG CHAMFER HSS TMX TAP...

HIGH SPEED STEEL GROUND THREADS TMX HAND TAP WITH STRAIGHT FLUTES - AVAILABLE IN THREE CHAMFER STYLES TAPER CHAMFER HAS 8-10 THREAD CHAMFER LENGTH PLUG CHAMFER HAS 3-5 THREAD CHAMFER LENGTH AND BOTTOMING CHAMFER HAS 1-2 THREAD LENGTH. M12 X 1.0 D5 PLUG...

HIGH SPEED STEEL GROUND THREADS TMX HAND TAP WITH STRAIGHT FLUTES - AVAILABLE IN THREE CHAMFER STYLES TAPER CHAMFER HAS 8-10 THREAD CHAMFER LENGTH PLUG CHAMFER HAS 3-5 THREAD CHAMFER LENGTH AND BOTTOMING CHAMFER HAS 1-2 THREAD LENGTH. M14 X 1.5 D5...

HIGH SPEED STEEL GROUND THREADS TMX FAST SPIRAL HAND TAP WITH STRAIGHT FLUTES - AVAILABLE IN TWO CHAMFER STYLES PLUG CHAMFER HAS 3-5 THREAD CHAMFER LENGTH AND BOTTOMING CHAMFER HAS 1-2 THREAD LENGTH. # 6 - 32 H2 FAST SPRIAL BOTTOMING CHAMFER HSS TMX TAP...

HIGH SPEED STEEL GROUND THREADS TMX HAND TAP WITH STRAIGHT FLUTES - AVAILABLE IN THREE CHAMFER STYLES TAPER CHAMFER HAS 8-10 THREAD CHAMFER LENGTH PLUG CHAMFER HAS 3-5 THREAD CHAMFER LENGTH AND BOTTOMING CHAMFER HAS 1-2 THREAD LENGTH. 1/2 - 13 H3...

HAND CAPS ARE USED TO CUT THREADS IN BLIND OR THROUGH HOLES. THEY ARE USED BY HAND OR IN GENERAL PURPOSE MACHINE OPERATIONS.

THESE GENERAL PURPOSE TAPS CAN BE USED BY HAND OR UNDER POWER IN THROUGH OR BLIND HOLES AND ARE SUITABLE FOR TAPPING MOST MATERIALS. THE CHIPS ARE RETAINED IN THE FLUTES DURING USE. THREE-FLUTED TAPS HAVE THE GREATEST CHIP HOLDING CAPACITY AND SHOULD BE...

THIS FLUTELESS TAP DOES NOT HAVE CUTTING EDGES AND IS USED IN THREAD FORMING PROCESSES. FOR USE WITH SOFTER MORE DUCTILE MATERIALS.

HIGH SPEED STEEL HAND TAPS WITH STRAIGHT FLUTES ARE DESIGNED FOR GENERAL PURPOSE HAND TAPPING OR IN PRODUCTION MACHINES WHERE GROUND THREAD ACCURACY AND PERFORMANCE ARE REQUIRED.