Threaded Plugs

MAXIMUM HEAT RESISTANCE OF NYLON PLASTIC 194° F (90° C). COMES COMPLETE WITH UNASSEMBLED OIL-RESISTANT SYNTHETIC RUBBER GASKETS.

MAXIMUM HEAT RESISTANCE OF NYLON PLASTIC 194° F (90° C). COMES COMPLETE WITH UNASSEMBLED OIL-RESISTANT SYNTHETIC RUBBER GASKETS.

THREADED PLUGS CAN BE USED AS A SPRING RETENTION UNIT AS SHOWN ABOVE OR AS A PLUG TO KEEP DEBRIS FROM ENTERING INTO A CRITICAL THREADED AREA.

DIN 906 THREADED PLUGS ARE USED TO CLOSE BORE HOLES WITH CYLINDRICAL TAPERED INTERNAL THREAD. THE TIGHTNESS DEPENDS ON THE MEDIUM PRESSURE TEMPERATURE AND MATERIAL PAIRING. THE DESIGN WITH GPC THREAD COATING PROVIDES A HIGHER DEGREE OF SAFETY.

DIN 906 THREADED PLUGS ARE USED TO CLOSE BORE HOLES WITH CYLINDRICAL TAPERED INTERNAL THREAD. THE TIGHTNESS DEPENDS ON THE MEDIUM PRESSURE TEMPERATURE AND MATERIAL PAIRING.

DIN 906 THREADED PLUGS ARE USED TO CLOSE BORE HOLES WITH CYLINDRICAL TAPERED INTERNAL THREAD. THE TIGHTNESS DEPENDS ON THE MEDIUM PRESSURE TEMPERATURE AND MATERIAL PAIRING.

DIN 906 THREADED PLUGS ARE USED TO CLOSE BORE HOLES WITH CYLINDRICAL TAPERED INTERNAL THREAD. THE TIGHTNESS DEPENDS ON THE MEDIUM PRESSURE TEMPERATURE AND MATERIAL PAIRING.

THREADED PLUGS CAN BE USED AS A SPRING RETENTION UNIT AS SHOWN ABOVE OR AS A PLUG TO KEEP DEBRIS FROM ENTERING INTO A CRITICAL THREADED AREA.

THREADED PLUGS CAN BE USED AS A SPRING RETENTION UNIT AS SHOWN ABOVE OR AS A PLUG TO KEEP DEBRIS FROM ENTERING INTO A CRITICAL THREADED AREA.

DIN 906 THREADED PLUGS ARE USED TO CLOSE BORE HOLES WITH CYLINDRICAL TAPERED INTERNAL THREAD. THE TIGHTNESS DEPENDS ON THE MEDIUM PRESSURE TEMPERATURE AND MATERIAL PAIRING.

J.W. WINCO 906-ST-R3/4-A STEEL THREADED PLUG WITH R 3/4"" TAPERED THREAD DIN 906 THREADED PLUGS ARE USED TO CLOSE BORE HOLES WITH CYLINDRICAL TAPERED INTERNAL THREAD. THE TIGHTNESS DEPENDS ON THE MEDIUM PRESSURE TEMPERATURE AND MATERIAL PAIRING.

GN 738 MAGNETIC PLUGS ATTRACT IRON PARTICLES WHICH MIGHT BE SUSPENDED IN THE LIQUID. THE MAGNETIC PIN IS OF A LENGTH WHICH MAKES IT IMPOSSIBLE TO DEMAGNETIZE ITSELF. TO AVOID BREAKAGE OR DE-MAGNETIZING ROUND ROD MAGNETS ARE FITTED WITH A PLASTIC...

DIN 906 THREADED PLUGS ARE USED TO CLOSE BORE HOLES WITH CYLINDRICAL TAPERED INTERNAL THREAD. THE TIGHTNESS DEPENDS ON THE MEDIUM PRESSURE TEMPERATURE AND MATERIAL PAIRING.

DIN 906 THREADED PLUGS ARE USED TO CLOSE BORE HOLES WITH CYLINDRICAL TAPERED INTERNAL THREAD. THE TIGHTNESS DEPENDS ON THE MEDIUM PRESSURE TEMPERATURE AND MATERIAL PAIRING.

MAXIMUM HEAT RESISTANCE OF NYLON PLASTIC 194° F (90° C). COMES COMPLETE WITH UNASSEMBLED OIL-RESISTANT SYNTHETIC RUBBER GASKETS.

GN 749 THREADED PIPE PLUGS SEAL IS RETAINED IN A GROOVE UNDERCUT IN THE MATING FACE WHICH PREVENTS IT FROM DROPPING OUT AND FROM EXTRUDING WHEN THE PLUG IS TIGHTENED. FOR THIS REASON THE SEAL CAN BE OF A SOFTER MATERIAL WHICH OFFERS BETTER SEALING.