Sunstar Heating Products Inc

FOR USE WITH STRAIGHT INFRARED TUBE HEATERS. DIFFUSES THE RADIATION ON THE FIRST 10' OF THE TUBE HEATER AND REDUCES THE CLEARANCE TO COMBUSTIBLES BELOW. THE DEFLECTOR IS 10' LONG AND SHIPS IN TWO...

FOR USE WITH ALL INFRARED TUBE HEATERS. CAN BE USED TO CONTROL UP TO 6 HEATERS AT ONCE. MAINTAINS CONSISTENT TEMPERATURES WITHIN A RANGE OF 35 TO 95F. THERMOSTAT IS EXTREMELY ACCURATE WITH A 2F...

HELPS TO MINIMIZE CONVECTION LOSSES AND INCREASE TUBE TEMPERATURES. RECOMMENDED FOR USE WHEN THE HEATERS ARE ANGLE MOUNTED OR WHEN OVERALL SYSTEM EFFICIENCY IMPROVEMENTS ARE NEEDED.

FOR USE WITH ALL STRAIGHT AND U-SHAPED INFRARED TUBE HEATERS. INTENDED FOR INSIDE INDIRECT VENTED USE.

SUNSTAR FLEXIBLE GAS CONNECTOR 36""L - FOR CERAMIC HEATERS 30302360 FEATURES LENGTH INCHES 36

GAS CONNECTION KIT - 1/2"" - INCLUDES BLACK STAINLESS STEEL GAS CONNECTOR MANUAL BALL VALVE SEDIMENT TRAP (TEE CAP NIPPLE) AND THREAD SEALING COMPOUND.

35000 BTU/HR. FOR HIGH FIRE AND 24000 BTU/HR. FOR LOW FIRE OPERATION. MOUNTING BRACKETS AND 3 POSITION SWITCH KIT SOLD SEPARATELY. COVERS 8' X 8' AREA IN HIGH WIND CONDITIONS OR 12' X 12' AREA IN...

35000 BTU/HR. FOR HIGH FIRE AND 24000 BTU/HR. FOR LOW FIRE OPERATION. MOUNTING BRACKETS AND 3 POSITION SWITCH KIT SOLD SEPARATELY. COVERS 8' X 8' AREA IN HIGH WIND CONDITIONS OR 12' X 12' AREA IN...

HEAT SHIELD KITS REDUCE CLEARANCES TO COMBUSTIBLES ABOVE TO 10"" AND ALLOWS THE HEATER TO RESIDE CLOSER TO THE CEILING. ALLOWS FOR HORIZONTAL AND UP TO 60° INSTALLATIONS. HARDWARE INCLUDED. MOUNTING...

FOR USE WITH ALL CERAMIC HEATERS. BALL VALVE WITH 1/2"" NPT FEMALE THREAD.

FOR USE WITH ALL INFRARED TUBE HEATERS. BALL VALVE WITH 1/2"" NPT FEMALE THREAD. UL LISTED.

FOR USE WITH ALL INFRARED TUBE HEATERS. CAN BE USED TO CONTROL UP TO 6 HEATERS AT ONCE. MAINTAINS CONSISTENT TEMPERATURES WITHIN A RANGE OF 45 TO 90F. THERMOSTAT IS EXTREMELY ACCURATE WITH A 1F...

FOR USE WITH 100000 TO 120000 BTU CERAMIC HEATERS. HELPS TO FOCUS THE RADIANT ENERGY TO A SMALLER AREA BY CHANGING THE REFLECTOR ANGLE FROM APPROXIMATELY 45 DEGREES TO 60 DEGREES.

FOR USE WITH 130000 TO 155000 BTU CERAMIC HEATERS. HELPS TO FOCUS THE RADIANT ENERGY TO A SMALLER AREA BY CHANGING THE REFLECTOR ANGLE FROM APPROXIMATELY 45 DEGREES TO 60 DEGREES.

FOR USE WITH 30000 TO 40000 BTU CERAMIC HEATERS. HELPS TO FOCUS THE RADIANT ENERGY TO A SMALLER AREA BY CHANGING THE REFLECTOR ANGLE FROM APPROXIMATELY 45 DEGREES TO 60 DEGREES.