Strapping & Stretch Wrap

Threaded Rod: 2-4, 6' Long, Alloy Steel, Grade B7 ACME, 2G, Right Hand Thread

3/16" Stroke Len, 0.02 Cu In Volume, 0.10 Sq In Effective Piston Area, Hydraulic, Single Acting, Threaded Body Clamp Cylinder 960 Lb Max Output, 200 to 10,000 psi, 1-9/16" Body Thread Len, 1-13/16" OAL, 1/8" Projection Len, 3/8" Projection Diam, 1/4" Rod...

Threaded Ball Plunger: 5/16-18, 0.156" Ball Dia, 37/64" Body Length, 0.04" Max Ball Reach 2 lb Initial End Force, 4.5 lb Final End Force, Stainless Steel Body, Stainless Steel Ball, Locking Element

Guide Post: Demountable, Ball Bearing Post, 1-1/2" OD, 10-15/16" OAL, Hardened Steel 3/8-16, 1-7/8" Collar OD, 1-7/16" Above Collar, Hardened Steel

Mold Blank, Punch & Die Set Hardware; Product Type: X-Style Side Lock ; Product Compatibility: Die Cast Mold; Injection Mold ; Thread Size: 1/4-20

Clamp Strap: Steel, 1/4, 3/8 & 5/16" Stud, Tapered Nose 13/16" Travel, 1" Wide, 1/2" High, 2-1/2" OAL, Black Finish

3-3/4" Wide x 1-5/8" Deep x 4-3/8" High Magnetic Welding & Fabrication Square 100 Lb Average Pull Force

Die Spring: 22 mm Hole Dia, 11 mm Rod Dia, 50 mm Free Length, Yellow 90 lb Max Load Deflection, 0.9843" Max Deflection, Chromium Alloy Steel

Lathe Chuck Tools; Chuck Diameter Compatibility (mm): 3 ; Chuck Diameter Compatibility (Inch): 3 ; Chuck Diameter Compatibility (Decimal Inch): 3 ; Nominal Key Size: 0.236in ; Product Compatibility: Independent Chuck ; Self-ejecting: Yes

3/16" Diam x 1/4" High, 0.02 Lb Average & 0.05 Lb Max Pull Force, Brass Alnico Shielded Magnet 800°F Max Operating Temp, 0.018" Wall Thickness

Cast Aluminum Bronze Die & Mold Shoulder Bushing: 1-3/4" ID, 2-7/8" OAL 2-7/16" Bottom OD, 2-1/4" Top OD, 2-5/8" Collar OD, 1/2" Under Collar, 2-3/8" Above Collar

1/2-13, 0.43" Thread Length, 0.31" Plunger Diam, 0.38" Plunger Projection, 1 Lb Init to 4 Lb Final End Force, Steel Pull Ring Plunger 0.56" Len Under Head, 0.81" Body Len, 1" Ring Diam, 1.06" Plunger Len, 1/2" Hex, 1/4" Head Height

1/4-20, 1/2" Thread Length, 0.144" Max Plunger Diam, 0.5 Lb Init to 1.5 Lb Final End Force, Locking Knob Handle Plunger Knobless Threaded Stud, 5/8" Length Under Head/Shoulder, 1/8" Plunger Projection

Die Spring: 18 mm Hole Dia, 9 mm Rod Dia, 55 mm Free Length, Green 218 lb Max Load Deflection, 0.5197" Max Deflection, Chromium Alloy Steel

Die Spring: 5/8" Hole Dia, 11/32" Rod Dia, 12" Free Length, Red 191 lb Max Load Deflection, 5.4331" Max Deflection, Chromium Alloy Steel

Threaded Spring Plunger: 3/8-16, 11/16" Thread Length, 0.186" Dia, 3/16" Projection 1 lb Initial End Force, 12 lb Final End Force, Steel Body, Locking Element