Strapping & Stretch Wrap

Vise Jaw: 1" Wide, 1.71" High, 25.4 mm Thick, Flat Soft, Fixed, Use with 6" Vises

Steel Die & Mold Shoulder Bushing: 3" ID 4.19" Bottom OD, 3-3/4" Top OD, 4.283" Collar OD, 2-1/2" Under Collar, 1-7/8" Above Collar

Fixture Jacks; Serrated: Yes; Body Diameter (Inch): 5/8; Body Height (Inch): 1-3/16; Thread Size: 3/8-16; Stem Diameter (Inch): 1/4; Minimum Base of Flange To Tip (Inch): 9/16; Maximum Base of Flange To Tip (Inch): 1-1/2; Body Material: Low Carbon Steel

Soft Lathe Chuck Jaw: Tongue & Groove 21" OAW, 4" OAH, 3" Between Mount Holes, 0.75" Fastener, Cast Aluminum

Threaded Spring Plunger: 5/16-18, 1" Thread Length, 0.135" Dia, 3/16" Projection 1.5 lb Initial End Force, 4.5 lb Final End Force, Steel Body, Locking Element

Die Spring: 25 mm Hole Dia, 12.5 mm Rod Dia, 45 mm Free Length, Green 421 lb Max Load Deflection, 0.4252" Max Deflection, Chromium Alloy Steel

Solid Mold Die Blanks & Punches

Die Spring: 18 mm Hole Dia, 9 mm Rod Dia, 30 mm Free Length, Green 218 lb Max Load Deflection, 0.2835" Max Deflection, Chromium Alloy Steel

Die Spring: 8 mm Hole Dia, 4 mm Rod Dia, 60 mm Free Length, Red 31 lb Max Load Deflection, 0.7559" Max Deflection, Chromium Alloy Steel

Unequal Double Threaded Stud: 7/16-20 & 7/16-14 Thread, 3-1/4" OAL Steel, Black Oxide Finish

Die Spring: 1-1/4" Hole Dia, 5/8" Rod Dia, 3-1/2" Free Length, Green 499 lb Max Load Deflection, 2.2638" Max Deflection, Chromium Alloy Steel

Guide Post: Press-Fit, Ball Bearing Post, 1-3/4" OD, 11-1/2" OAL, Hardened Steel 3/8-10, Hardened Steel

Threaded Spring Plunger: 1/4-20, 1" Thread Length, 0.118" Dia, 3/16" Projection 3 lb Initial End Force, 13 lb Final End Force, Steel Body

Threaded Rod: 1-12, 3' Long, Low Carbon Steel UNF, Right Hand Thread

Threaded Rod: 1-1/2-5, 6' Long, Alloy Steel, Grade B7 ACME, 2C, Right Hand Thread

3" Jaw Opening Capacity x 1-1/16" Throat Depth, Horizontal Drill Press Vise 3" Wide Jaw, Stationary Base, Standard Speed, 7-1/4" OAL x 2.975" Overall Height, Cast Iron