Strapping & Stretch Wrap

Fully Threaded Stud: 7/8-9 Thread, 4" OAL Alloy Steel, Plain Finish

Shoulder Tooling Ball: Inspection, 3/8" Ball Dia, 3/16" Shank Dia, Slip-Fit 0.3" Ball Center to Shoulder Bottom, 3/4" Ball Center to Shank Bottom, Steel

Steel Press Fit Ball Plunger: 0.312" Dia, 0.688" Long 0.312" Ball Dia, 0.09" Ball Reach, 4 lb Initial Force, 10 lb Final Force

Cast Iron Bar Clamp: 24" Capacity, 5" Throat Depth, 1,200 lb Clamp Pressure, 28" OAL 1,200 Lb Clamping Pressure, 28" OAL

Straight Ejector Pin: 5.2 mm Pin Dia, 315 mm OAL, Steel 10 mm Head Dia, 3 mm Head Height, 312 mm Pin Length

Die Spring: 4-1/2" Free Length, Green Chromium Alloy Steel

Threaded Spring Plunger: #8-32, 1/2" Thread Length, 0.07" Dia, 3/32" Projection 0.5 lb Initial End Force, 4 lb Final End Force, Steel Body, Locking Element

Die Spring: 3-1/2" Free Length, Red 612 lb Max Load Deflection, 1.189" Max Deflection, Chromium Alloy Steel

Guide Post: Press-Fit, Ball Bearing Post, 1-3/4" OD, 5-3/4" OAL, Hardened Steel 3/8-10, Hardened Steel

Soft Lathe Chuck Jaw: 3.75" Max Capacity, Northfield 3/4" OAW, 3" OAH, Aluminum

Die Spring: 1-1/2" Hole Dia, 3/4" Rod Dia, 5-1/2" Free Length, Light Green 359 lb Max Load Deflection, 3.5472" Max Deflection, Chromium Alloy Steel

1 Hole, 0.1969" Hole Diam, 51/64" Overall Width, 1-3/16" Deep, 51/64" High, 9.5 Lb Average Pull Force, Alnico Power Magnets 7.5mm Pole Width, 550°C Max Operating Temp, Grade 5 Alnico

Clamp Handle Grip 1 Piece, Use with 202 Vertical Hold Down Toggle Clamp

Lathe Chuck Adapter Back Plate: 8" Chuck, for 1-101-0800,1-103-0800,1-151-0800,1-153-0800 Chucks Series D, D1-5 Mount, 7.87" OD, 2.165" Through-Hole Dia, Steel

Bar Clamp: 4" Capacity, 3" Throat Depth, 260 lb Clamp Pressure, 10" OAL 260 Lb Clamping Pressure, 10" OAL

Steel Press Fit Ball Plunger: 0.312" Dia, 0.0643" Long 0.187" Ball Dia, 0.09" Ball Reach, 2 lb Initial Force, 5 lb Final Force