Strapping & Stretch Wrap

Fully Threaded Stud: M12 x 1.75 Thread, 40 mm OAL Carbon Steel, Oil Finish

Soft Lathe Chuck Jaw: Serrated 2.5" OAH, 19" Between Mount Holes, Steel

M16x1.5, 36mm Thread Length, 8mm Plunger Diam, Locking Pin Knob Handle Indexing Plunger Plunger Style G, 36mm Body Length, 68mm OAL, Stainless Steel

M12x1.5, 17mm Thread Length, 6mm Plunger Diam, Lock & Clamp Knob Handle Indexing Plunger 17mm Body Length, 57.8mm OAL

Vise Jaw Accessory: Chip Plug Brass, 23" OAL, Includes O-Ring

Power Lathe Chuck: 28" Dia, 3 Jaws, A2-11 Mount Drawbar Actuation

Soft Lathe Chuck Jaw: Serrated 2-1/2" OAW, 4" OAH, 5-3/4" OAL, 0.55" Between Mount Holes, Steel

M16, Steel, Uncoated, Shoulder Clamp Screw Use with ZPS

Threaded Spring Plunger: 3/8-16, 0.8661" Thread Length, 0.1575" Dia, 0.1181" Projection Steel Body

T-Slot Toe Clamps; Overall Length (mm): 3.93 ; Overall Length (Decimal Inch): 3.93 ; T-Slot Size (mm): 16mm ; T-Slot Size (Inch): 16mm ; Holding Force (Lb.): 50000N ; Overall Height (mm): 2.3893

5/8-18, 32mm Thread Length, Straight Cam Action Indexing Plunger 16mm Body Diam, 32mm Body Length, 40mm Handle Length, 10mm Plunger Projection

1,500 Lb, 4-1/2" Max Opening, 2-3/8" Open Throat Depth, 2-1/2" Closed Throat Depth, Cantilever Clamp Stainless Steel Jaw, T-Handle, 1-1/8" Max Width

M16x1.5, 22mm Thread Length, 8mm Plunger Diam, Lock & Clamp Knob Handle Indexing Plunger 22mm Body Length, 74mm OAL

Machine Vise: 8" Jaw Width, Horizontal, Stationary Base 6" Jaw Height, 1 Station, 24" Base Length

Threaded Spring Plunger: M6, 0.7874" Thread Length, 0.1063" Dia, 0.0984" Projection Steel Body, Locking Element

Threaded Ball Plunger: 1/2-13, 0.315" Ball Dia, 1.0236" Body Length, 0.0984" Max Ball Reach 30 N Initial End Force, 55 N Final End Force, Stainless Steel Body, Stainless Steel Ball, Locking Element