Strapping & Stretch Wrap

Round Positioning Grippers; Material: Carbide-Tipped ; Attachment Style: Threaded ; Thread Size: 1/4-28 in ; Finish: Zinc-Plated ; Tooth Pattern: Straight Serration ; Tooth Grade: Extra Fine

Hardened Steel & Stainless Steel Clamp Cylinder Pressure Point For ZPS, 32mm High x 32mm Wide

3/8-24, 15mm Thread Length, 5mm Plunger Diam, Hardened Locking Pin Knob Handle Indexing Plunger Plunger Style B, 24mm Body Length, 43.5mm OAL, Stainless Steel

Fully Threaded Stud: 7/16-20 Thread, 12" OAL Carbon Steel, Zinc-Plated

Threaded Spring Plunger: 5/16-18, 0.6299" Thread Length, 0.1575" Dia, 0.0787" Projection Steel Body, Locking Element

Self-Centering Manual Lathe Chuck: 3-Jaw, 15" Dia Master Jaws, Plain Back Mount, Adjustable, 2,000 Max RPM

2.2047" OAL, 1.5748" Head Height, 0.6693" OD, Tempered Steel, Threaded Rest Button Black Oxide Coating, M10 Thread

0.8268" OAL, 0.3937" Head Height, 0.3937" OD, Tempered Steel, Threaded Rest Button Black Oxide Coating, M6 Thread

M16x1.5, 23mm Thread Length, 8mm Plunger Diam, Locking Pin Knob Handle Indexing Plunger Plunger Style B, 36mm Body Length, 68mm OAL, Stainless Steel

1/2-13 6" OAL Equal Double Threaded Stud Alloy Steel, Black Oxide Finish, 1-1/2" Equal Thread Length

0.8661" OAL, 0.315" Head Height, 63/64" OD, Tool Steel, Ground, Press Fit Rest Button Uncoated, 0.4724" Pin Diam

Threaded Spring Plunger: M8, 0.8661" Thread Length, 0.1378" Dia, 0.1181" Projection Steel Body, Locking Element

1,500 Lb, 3" Max Opening, 1-1/4" Open Throat Depth, 1-1/2" Closed Throat Depth, Cantilever Clamp Stainless Steel Jaw, T-Handle, 1-1/8" Max Width

Hard Lathe Chuck Jaw: 15'' Max Chuck Dia, Hard 2 Step, 3'' Between Mount Hole Centers, Case Hardened Steel

Hard Lathe Chuck Jaw: Hard Top 2'' OAH, 4.35'' OAL, 1 Step, 0.63'' Between Mount Hole Centers, Case Hardened

Hard Lathe Chuck Jaw: Hard 3 Step, Case Hardened Steel