Reinforcers

Dowel Pin: 5/8-in Dia, Alloy Steel, Bright/Uncoated Finish, Grade 8 (1) Beveled & (1) Rounded, 46,000 lb (Single Shear Strength) & 92,000 lb (Double Shear Strength), ASME B18.8.2

Dowel Pin: 3/8 x 2-1/2", Alloy Steel, Grade 8, Bright Finish (1) Beveled & (1) Rounded, 16,550 lb (Single Shear Strength) & 33,100 lb (Double Shear Strength), ASME B18.8.2

Hex Head Cap Screw: 1/2-13 x 5-3/4", Grade 8 Steel, Zinc Yellow Dichromate Finish Partially Threaded, ASME B18.2.1 & SAE J429

Pilot Pins; Type: Pilot Pin ; System of Measurement: Inch ; Diameter (mm): 3.0000 ; Pin Length (mm): 84.90 ; Material: Steel ; End Type: Point

Socket Cap Screw: M12 x 1.75, 20 mm Length Under Head, Socket Cap Head, Hex Socket Drive, Alloy Steel, Metric Blue Finish Fully Threaded & Partially Threaded

Hex Nut: 2-1/2 - 4, Grade 1215 & 12L14 Steel Right Hand Thread, 3-7/8" Across Flats, 2G

3/4 x 4" Shoulder Diam x Length, 1/2-13, 1-1/4" Thread Depth, Stripper Bolt (Female Thread) 1/2" Head Height, 1" Head Diam, Grade 4140 Alloy Steel

Set Screw: M6 x 1.00 x 12 mm, Soft Tip Point, Steel, Grade 5.8 3 mm Hex, Black Oxide Finish, Brass Tip, RoHS

Machine Screw: Cheese Head, Slotted Steel, Zinc-Plated, Grade 4.8, DIN 84 & ISO 1207

Machine Screw: M4x0.7 x 50.00 mm Length Under Head, Cheese Head, Slotted Steel, Zinc Finish, Grade 4.8,

Machine Screw: Cheese Head, Slotted Steel, Zinc-Plated, Grade 4.8, DIN 84 & ISO 1207

Machine Screw: M6x1 x 8.00 mm Length Under Head, Cheese Head, Slotted Steel, Zinc Finish, Grade 4.8,

Machine Screw: M5x0.8 x 16.00 mm OAL, Flat Head, Slotted Steel, Zinc Finish, Grade 4.8,

Machine Screw: M6x1 x 25.00 mm Length Under Head, Cheese Head, Slotted Steel, Zinc Finish, Grade 4.8,

Machine Screw: Oval Head, Phillips Steel, Zinc-Plated, Grade 4.8, DIN 966

Machine Screw: M5x0.8 x 12.00 mm OAL, Flat Head, Slotted Steel, Zinc Finish, Grade 4.8,