Pullers & Sets

Cap Screws, 7/16 in-20 UNF x 4 1/2 inFeaturesFor use with J4005B crossarm and puller J4005Gear puller

PULLER STEP PLATE 3/4FeaturesProvides forcing screw base for hollow shaft applications 3/4" to 2 3/8" bore

Adjustable Jaw Puller, 2 Way, 7-1/8 in, 10 tonsFeaturesUsed to pull gears off a hubPullers can get a grip without damaging the case-hardened gear teeth

4" Reach Reversible JawFeaturesAdjustable reversible jaw4 1/2 in reach

Adapters, 5/8 in x 7/8 in FemaleFeaturesImpact drive adapterUse adapters to help increase or decrease drive end size

5/8-12 Acme 2-Way Threaded CrossarmFeaturesThreaded Crossarms12-in Thread size

2 1/2" OD-7/8-14 UNF Reversible Adjusting NutFeaturesProto® Reversible Adjusting NutThread: 7/8-in -14 UNF

Gear Pullers, 2 Way, 10 in, 7 tonsFeaturesForcing screws are forged from alloy steelToggle-type puller incorporates an automatic grip-tightening feature

Cap Screws, 3/8 in-24 UNC x 3 inFeaturesFor use with J4005B crossarm and puller J4005Gear puller

Adapters, 5/8 in x 3/4 in MaleFeaturesImpact drive adapterUse adapters to help increase or decrease drive end size

2 1/2-lb Slide HammerFeaturesProto® Slide HammerHole Diameter (in): 5/8

Ratcheting Leg Pullers, Short/Long Leg, 5 in - 7-1/2 in Spread, SteelFeaturesRatcheting pullers have a time-saving, indexing jaw designLegs index into position and stay in place, letting you easily support the puller and quickly connect each jaw one at a...

6" Reach Reversible JawFeaturesAdjustable reversible jaw4 1/2 in reach

Dual Reach Jaw, 4 in and 2 inFeaturesReplacement Puller JawDual Reach

3/4-12 Acme 2-Way Threaded CrossarmFeaturesThreaded Crossarms12-in Thread size

Forcing Screw, 5/8 in - 12 x 9/16 inFeaturesForcing screws are coated with an aerospace dry film lubricant to increase screw life, reduce wear and torque required for screw turningScrew threads must be kept clean at all times