Power Grinders, Buffers & Sanders

Air Angle Grinder: 4" Wheel Dia, 12,000 RPM 24 CFM, Rear Exhaust

Air Angle Grinder: 4" Wheel Dia, 12,000 RPM 23.3 CFM, 1/4" Inlet, Front Exhaust

Air Handheld Disc Sander: 3 & 4.5'' Pad Dia, 14,000 RPM 90 psi, 1/4'' Inlet

3-1/4 x 5" 10,000 OPM Palm Air Orbital Sander 13 CFM, 90 psig, 1/4 NPT Inlet, Rectangular Pad

Cordless Angle Grinder: 5" Wheel Dia, 9,000 RPM, 20V 5/8-11 Spindle, 2 Battery Included, Includes Battery

Cartridge Fast-Acting Fuse: 0.5 A, 1-1/4" OAL, 1/4" Dia 250V, Glass

Cylindrical Time Delay Fuse: RK5, 3.5 A, 50.8 mm OAL, 14.4 mm Dia 20 kA at DC & 200 kA at AC, Fiberglass;Polyester

15 Amp, 350 VA, Flat Pack Mount Standby Backup Uninterruptible Power Supply Backup 2-1/2 min with Full Load & 12 min with Half Load, 120 VAC Input & Output, 180 Watt Output, 1 Phases, 6 Outlets

Flush End Fast-Acting Fuse: 40 A, 3-3/16" OAL 200 (RMS) & 50 kA at DC

1 Phase, 0.05 kVA, Control Transformer 2 Input, 1 Output Winding, 60 Hz, 3.99 Inch Deep x 2.72 Inch High, 131°F Temp Rise

Cartridge Fast-Acting Fuse: J, 150 A, 5-3/4" OAL 600V, 200 kA (RMS)

7-1/4 Inch Long, Nylon, Fuse Puller For Use with 0 to 100 Amp, 250 Volt Fuses, 0 to 60 Amp, 600 Volt Fuses, 9/16 Inch to 1 inch Diameter Fuses

Air Die Grinder: 1/4'' Collet 1 hp, 43 CFM, Rear Exhaust

1 Outlet, 120 Volts, 15 Amps, Power Outlet Strip Direct Plug-in Mount, 5-15P NEMA Configuration

3 Outlets, 125 Volt, 15 Amp, Yellow, GFCI and Triple Tap Cord Set 5-15P, 5-15R NEMA Configuration, 25 Ft. Long, cUL Listed, OSHA, UL File E174279

Cartridge Time Delay Fuse: J, 45 A, 27 mm Dia 100 kA at DC & 300 kA at AC (RMS)