Power Distribution & Generation

Abrasive Belt: 4" Wide, 24" Long, 80 Grit, Aluminum Oxide Medium Grade, Coated, Cloth Backing, Series KK711X

Straight Flute Thread Mill: External & Internal, 4 Flutes, 3/8" Shank Dia, Solid Carbide 18 TPI, 0.335" Cut Dia, 0.693" LOC, 3.5" OAL, AlTiN+ Coated

Abrasive Bur: SD-81, Ball 3/16" Shank, 9/16" LOC, 2" OAL

Mounted Point: 5/16" Thick, 1/8" Shank Dia, B43, Medium Burnt Orange, Aluminum Oxide, 1-1/2" Shank Length

Helical Flute Thread Mill: #12-24, Internal, 3 Flute, 6.00 mm Shank Dia, Solid Carbide 24 TPI, 4.15 mm Cut Dia, 11.11 mm LOC, 57.00 mm OAL, TiCN Coated

Depressed Grinding Wheel: Type 27, 4-1/2" Dia, 7/8" Hole, Zirconia Alumina & Aluminum Oxide 60 Grit

Straight Flute Thread Mill: 1-1/8-7, Internal, 5 Flutes, Solid Carbide 7 TPI, 0.626" Cut Dia, 1.4287" LOC, 3.6221" OAL, TiAlN Coated

Helical Flute Thread Mill: #6-32, Internal, 3 Flute, 6.00 mm Shank Dia, Solid Carbide 32 TPI, 2.70 mm Cut Dia, 2.38 mm LOC, 57.00 mm OAL, TiCN Coated

Quick-Change Disc: CDR, 3" Disc Dia, 50 Grit, Aluminum Oxide, Coated Reddish Brown, Polyester Backed, 2,500 RPM

Surface Grinding Wheel: 7" Dia, 1/2" Thick, 1-1/4" Hole, 46 Grit, G Hardness Type 1, Aluminum Oxide, Vitrified Bond, Coarse Grade, 3600 RPM

Helical Flute Thread Mill: Internal & External, 3 Flute, 1/4" Shank Dia, Solid Carbide 27 TPI, 0.245" Cut Dia, 0.437" LOC, 2.5" OAL, AlTiN Coated

Straight Cartridge Roll: 1/2" Dia, 80 Grit, Aluminum Oxide 1/8" Pilot Hole Diam

Single Profile Thread Mill: Internal, 3 Flutes, Solid Carbide 0.059" Cut Dia, 1.22" OAL, TiCN Coated

Quick-Change Disc: SocAtt, 3" Disc Dia, Aluminum Oxide, Non-Woven Dark Blue

Mounted Point: 1/8" Thick, 1/8" Shank Dia, B72, Medium Aluminum Oxide

Diamond Dresser: 1/3 Carat, 1/2" Shank Dia 3" Shank Length, 1 Stone