Power Distribution & Generation

Helical Flute Thread Mill: Internal, 3 Flute, 1/8" Shank Dia, Solid Carbide 0.056" Cut Dia, 0.2" LOC, 1.5" OAL, AlTiN+ Coated

Helical Flute Thread Mill: 9/16-12, Internal & External, 4 Flute, 1/2" Shank Dia, Solid Carbide 12 TPI, 0.4" Cut Dia, 1.117" LOC, 3.5" OAL, AlTiN+ Coated

Cutoff Wheels; Wheel Diameter (Inch): 4-1/2 ; Wheel Thickness (Inch): 0.045 ; Hole Size (Inch): 7/8 ; Abrasive Material: Aluminum Oxide ; Reinforced: Reinforced ; Grit: 46

Mounted Points; Point Shape: Bullet ; Point Shape Code: B51 ; Abrasive Material: Aluminum Oxide ; Tooth Style: Single Cut ; Grade: Very Fine ; Grit: 180

Deburring Wheels; Wheel Diameter (Inch): 4 ; Face Width (Inch): 3/8 ; Center Hole Size (Inch): 3/8 ; Abrasive Material: Aluminum Oxide ; Grade: Coarse ; Wheel Type: Type 1

American-Pattern File: Half Round, Double;Single 7/32" Wide, Handle

Mounted Flap Wheel: 2" Dia, 1-1/4" Face Width, 100 Grit, Aluminum Oxide Non-Woven, 12,000 Max RPM

American-Pattern File: 10" Long, Half Round, Double 15/16" Wide, 9/32" Thick, Tang

Mounted Point: 1/8" Thick, 1/8" Shank Dia, W143, 90 Grit, Fine White, Aluminum Oxide, 1-1/2" Shank Length

Sanding Stars; Abrasive Type: Coated ; Grade: Fine ; Grit: 120 ; Connector Type: Arbor ; Abrasive Material: Aluminum Oxide ; Maximum Rpm: 6350.000

Cut-Off Wheel: Type 1 (01/41), 14" Dia, Aluminum Oxide Reinforced 24 Grit, 5500 Max RPM

Helical Flute Thread Mill: M5 x 0.8, Metric, 2 Flute, 6 mm Shank Dia, Solid Carbide DLC-IGUSS Coated

Helical Flute Thread Mill: 5/16-18, UNC, 2 Flute, 0.375" Shank Dia, Solid Carbide 18 TPI, 0.224" Cut Dia, 0.278" LOC, DLC-IGUSS Coated

Abrasive Bur: SM-2, 1/4" Cut Dia, Pointed Cone, Diamond Cut 1/4" Shank

Rectangle Polishing Stone: Aluminum Oxide, 6" OAL 100 Grit, Semi-Hard, White

Abrasive Bur: SD-3, 3/8" Cut Dia, Ball, Double Cut 1/4" Shank