Power Distribution & Generation

Mounted Flap Wheel: 2" Dia, 1" Face Width, Aluminum Oxide 1/4" Shank Dia, Non-Woven, Fine Grade, 13,000 Max RPM

Flat Ceramic Finishing Stick 40mm Long x 0.8mm Wide x 6mm Thick, 600 Grit

Helical Flute Thread Mill: 7/8-14, Internal & External, 4 Flute, 1/2" Shank Dia, Solid Carbide 14 TPI, 0.49" Cut Dia, 1-1/4" LOC, 3.5" OAL, AlTiN Coated

Helical Flute Thread Mill: 1/2-16, Internal/External, 4 Flute, 12.00 mm Shank Dia, Solid Carbide 16 TPI, 10.50 mm Cut Dia, 26.19 mm LOC, 80.00 mm OAL, TiCN Coated

Straight Flute Thread Mill: #20, External, 5 Flutes, 3/8" Shank Dia, Solid Carbide 20 TPI, 0.37" Cut Dia, 0.773" LOC, 3.5" OAL, TiN Coated

Cross & Square Pads

Hook & Loop Disc: Non-Woven, Aluminum Oxide Nonwoven, Series 07-X, Quick-Step FX

Abrasive Bur: Double Cut 6.0000mm Shank, 27.0000mm LOC, N/Amm OAL

36 Piece, 36, 60, 80, 120 Grit, 2" Disc Diam, Abrasive Disc Kit Coated & Nonwoven, Very Coarse, Medium, Fine Grade, Aluminum Oxide

Cut-Off Wheel: Type 1, 3" Dia, 1/16" Thick, 1/4" Hole, Aluminum Oxide Reinforced, 46 Grit, 25470 Max RPM, Use with Die Grinders

Fiber Disc: 7" Disc Dia, 7/8" Hole, 24 Grit, Ceramic Coarse Grade

Quick-Change Disc: Type S, 1" Dia, 240 Grit, Aluminum Oxide, Coated Cloth-Backed, 40000 RPM

Helical Flute Thread Mill: 7/16-20, Internal, 3 Flute, 3/8" Shank Dia, Solid Carbide 20 TPI, 0.3700 mm Cut Dia, 0.9060" LOC, 2.8740" OAL, TiCN Coated

Round Ceramic Finishing Stick 50mm Long x 3mm Wide, 800 Grit

Deburring Wheels; Wheel Diameter (Inch): 3 ; Face Width (Inch): 3/16 ; Center Hole Size (Inch): 1/4 ; Abrasive Material: Aluminum Oxide ; Grade: Medium ; Wheel Type: Type 1

Abrasive Bur: Cylinder Ball End 1/4" Shank