Power Distribution & Generation

Flap Disc: 5/8-11 Hole, 181 & 80 Grit, Zirconia Alumina, Type 29 Coated, Medium Grade, Phenolic-Backed, 8,600 RPM

Flap Disc: 5/8-11 Hole, 181 & 80 Grit, Zirconia Alumina, Type 27 Coated, Medium Grade, Phenolic-Backed, 8,600 RPM

4" 120 Grit Ceramic Crimped Disc Brush Fine Grade, Drive Arbor Connector, 1-1/2" Trim Length, 1-1/4" Arbor Hole

Cutoff Wheel: Type 27, 7" Dia, 1/4" Thick, 5/8" Hole, Aluminum Oxide Reinforced, 24 Grit, 8,500 Max RPM, Use with Angle Grinders

Flap Disc: 5/8-11 Hole, 40 Grit, Zirconia Alumina, Type 27 Coated, Coarse Grade, Phenolic-Backed, 13,000 RPM

Cut-Off Wheel: Type 1 (01/41), 4" Dia, Aluminum Oxide Reinforced 60 Grit, 19000 Max RPM,

Cut-Off Wheel: Type 1, 16" Dia, 3/32" Thick, Aluminum Oxide Reinforced, 36 Grit, 3850 Max RPM, Use with Chop Saws

Flexible Cylinder Hone: 120 Grit, Silicon Carbide 13-1/2" OAL

Flexible Cylinder Hone: 6 mm Max Bore Dia, 240 Grit, Silicon Carbide 7-7/8" OAL

Flexible Cylinder Hone: 23.8 mm Max Bore Dia, 320 Grit, Silicon Carbide 7-7/8" OAL

Flexible Cylinder Hone: 240 Grit, Silicon Carbide Fine Grade, 7-7/8" OAL

Flexible Cylinder Hone: 20 mm Max Bore Dia, 240 Grit, Silicon Carbide 7-7/8" OAL

Flexible Cylinder Hone: 320 Grit, Silicon Carbide 7-7/8" OAL

Flexible Cylinder Hone: 120 Grit, Silicon Carbide Coarse Grade, 7-7/8" OAL

Flexible Cylinder Hone: 5 mm Max Bore Dia, 120 Grit, Silicon Carbide 7-7/8" OAL

Cut-Off Wheel: Type 1, 4" Dia, 1/8" Thick, 3/8" Hole, Aluminum Oxide Reinforced, 36 Grit, 15200 Max RPM, Use with Cut Off Tool