Power Distribution & Generation

American-Pattern File: 8" Long, Round, Single 1-1/2" Wide, 1.125" Thick, Tang

Helical Flute Thread Mill: 1/4-20, Internal, 5 Flute, 1/4" Shank Dia, Solid Carbide 0.5250 mm Cut Dia, 13.34 mm LOC, 57.00 mm OAL, TiCN Coated

Depressed Center Wheel: Type 27, 9" Dia, Ceramic Resinoid, 6,600 Max RPM, Use with Angle Grinder

Deburring Wheel: 12" Dia, 1" Face Width, 5" Hole, Density 5 N/A Aluminum Oxide Medium Grade, Convolute Wheel Wheel, 3000.000 RPM

Abrasive Belts; Belt Width (Inch): 3/4 ; Belt Length (Inch): 18 ; Grade: Very Fine ; Abrasive Type: Non-Woven ; Abrasive Material: Nylon ; Wet/Dry Operation: Dry

Helical Flute Thread Mill: #10-24, Internal, 4 Flute, 6.00 mm Shank Dia, Solid Carbide 24 TPI, 3.58 mm Cut Dia, 1.06 mm LOC, 76.00 mm OAL, TiCN Coated

Helical Flute Thread Mill: #10-32, Internal/External, 3 Flute, 3/16" Shank Dia, Solid Carbide 0.1200 mm Cut Dia, 5/16" LOC, 2" OAL, Bright/Uncoated

Depressed Grinding Wheel: Type 29, 4-1/2" Dia, 5/8" Hole, Aluminum Oxide 100 Grit, 13300.000 Max RPM, Angle Grinder

Helical Flute Thread Mill: 3/8-16, External, 3 Flute, 8.00 mm Shank Dia, Solid Carbide 16 TPI, 7.90 mm Cut Dia, 19.10 mm LOC, 63.00 mm OAL, TiCN Coated

Straight Flute Thread Mill: 1/4-24, Internal, 3 Flutes, 1/4" Shank Dia, Powdered Metal 24 TPI, 0.18" Cut Dia, 0.517" LOC, 2.5" OAL, TiCN Coated

Helical Flute Thread Mill: M10x1.5, Internal, 4 Flute, 8.00 mm Shank Dia, Solid Carbide 7.80 mm Cut Dia, 23.00 mm LOC, 64.00 mm OAL, TiAlN Coated

Cut-Off Wheel: 5" Dia, 3/64" Thick, 7/8" Hole, Aluminum Oxide Reinforced, 30 Grit, 12250 Max RPM, Use with Angle Grinders

Straight Flute Thread Mill: Internal, 5 Flutes, Solid Carbide 0.626" Cut Dia, 1.4173" LOC, 3.6221" OAL, TiAlN Coated

Mounted Points; Point Shape: Pointed ; Point Shape Code: B53 ; Abrasive Material: Aluminum Oxide ; Tooth Style: Pointed ; Grade: Fine ; Grit: 120

Abrasive Bur: SD-5, Ball 1/4" Shank

Mounted Flap Wheel: 3/8" Dia, 3/8" Face Width, 120 Grit, Aluminum Oxide 1/8" Shank Dia, Coated, 40,000 Max RPM