PERLE SYSTEMS Perle 05081054 S-1110PP-S2ST10 - Fiber media converter - GigE - 10Base-T, 1000Base-LX, 1000Base-LH, 100Base-TX, 1000Base-T - ST single-mode / RJ-45 - up to 6.2 miles - 1310 nm
PERLE SYSTEMS Perle 05081054 S-1110PP-S2ST10 - Fiber media converter - GigE - 10Base-T, 1000Base-LX, 1000Base-LH, 100Base-TX, 1000Base-T - ST single-mode / RJ-45 - up to 6.2 miles - 1310 nm
PERLE SYSTEMS Perle 05081054 S-1110PP-S2ST10 - Fiber media converter - GigE - 10Base-T, 1000Base-LX, 1000Base-LH, 100Base-TX, 1000Base-T - ST single-mode / RJ-45 - up to 6.2 miles - 1310 nm
Previous Next

Perle

PERLE SYSTEMS Perle 05081054 S-1110PP-S2ST10 - Fiber media converter - GigE - 10Base-T, 1000Base-LX, 1000Base-LH, 100Base-TX, 1000Base-T - ST single-mode / RJ-45 - up to 6.2 miles - 1310 nm

0 review Write a Review
Auto-MDIX. Auto-MDIX (automatic medium-dependant interface crossover) detects the signaling on the copper Ethernet interface to determine the type of cable conn…
SKU:
05081054
UPC:
734660810548
Condition:
New
Weight:
3.10 LBS
Minimum Purchase:
1 unit
Unit of Measure:
EA
QPU:
1
Country of Origin:
CA
UNSPSC Code:
43201553
UNSPSC Commodity:
Transceivers and media converters
Model No:
S-1110PP-S2ST10
DEPT:
PC ACCESSORIES
CLASS:
SURGE/CABLES / NETWORK CABLE/ACC
model:
S-1110PP-S2ST10
quantity:
1
Request a Quote
Hurry up! Current stock:
Product Details  
Auto-MDIX. Auto-MDIX (automatic medium-dependant interface crossover) detects the signaling on the copper Ethernet interface to determine the type of cable connected (straight-through or crossover) and automatically configures the connection when enabled. The media converter can also correct for wires swapped within a pair. PD power reset. Ideal for remotely resetting equipment, this configurable function performs a momentary power reset to the attached Powered Device (PD). When enabled, the media converter will, upon loss of fiber RX, turn off PSE output power supplied to the PD device for 2 seconds then turn the power back on and leave it on until such time that another fiber RX link is lost (after it was re-established). When disabled, a loss of fiber RX has no effect on PSE power to the PD device(s).

Customers Also Viewed