PERLE SYSTEMS 05061090 Perle C-100MM-S2SC80 - Media converter - 100Mb LAN - 100Base-FX, 100Base-ZX - SC multi-mode / SC single-mode - up to 49.7 miles - 1310 nm / 1550 nm

Far-End Fault (FEF). When enabled, the media converter transmits the Far-End Fault indication over the fiber connection whenever a receive failure is detected. The media converter continuously monitors the fiber connection and clears the Far-End Fault indication condition when a valid signal is received. Pause. Pause signaling is an IEEE feature that temporarily suspends data transmission between two devices in the event that one of the devices becomes overwhelmed. The media converter is transparent to pause frames. Link pass-through. Far-End Fault indication on the 100 Base-FX fiber interface has no effect on the other interface. Using link pass-through with Far-End Fault minimizes data loss when a fault occurs. If a fault occurs, the end devices have the indication of a failure available to making trouble shooting easier. Signal regeneration. Signal regeneration maintains signal integrity and allows for maximum fiber to fiber connections without degradation. Cascading media converter can be cascaded. Two or more media converters can be chained in a link to achieve even greater distances.