Packaging & Shipping Supplies

1.249" Pin Diam, 10-1/4" OAL, Steel, Die & Mold Leader Pin 1.49" Head Diam x 5/16" Head Height, +0.0000/-0.0600 OAL Tolerance

Die Spring: 3/8" Hole Dia, 3/16" Rod Dia, 1-3/4" Free Length, Green 35 lb Max Load Deflection, 0.9488" Max Deflection, Chromium Alloy Steel

Steel Press Fit Ball Plunger: 0.5" Dia, 1.1" Long 0.437" Ball Dia, 0.161" Ball Reach, 4 lb Initial Force, 9 lb Final Force

Lathe Chuck Adapter Back Plate: 10" Chuck, for 1-101-1000,1-103-1000,1-151-1000,1-153-1000 Chucks Series D, D1-6 Mount, 9.84" OD, 2.992" Through-Hole Dia, Steel

M10x1.5, 1.17" Thread Length, 6mm Plunger Diam, 3.3 N Init to 16.7 N Final End Force, Stainless Steel Locking L Handle Plunger 51mm Body Length, 33mm Length Under Head, Locking Element, 14mm Plunger Projection

Threaded Spring Plunger: #10-32, 0.468" Thread Length, 0.093" Dia, 0.065" Projection 1.7 lb Initial End Force, 6.2 lb Final End Force, Steel Body, Locking Element

88.96 N Load Capacity, Steel, Hold-Down Plier Clamp 3.3" Max Jaw Capacity, 1/2-13 Spindle, Spindle End

18 to 24mm Hex, 1/2-13 Stud Thread, Irregular Hex Clamp 0.394" Hex Height, 4,000 Lb Holding Force, 1" Thread Length, 65 Ft/Lb Torque

Aluminum Bronze Die & Mold Shoulder Bushing: 1-1/4" ID 1.6255" Bottom OD, 1.6255" Top OD, 1.8" Collar OD, 5-11/16" Above Collar

Threaded Spring Plunger: 3/8-16, 1-1/8" Thread Length, 0.186" Dia, 3/16" Projection 2.8 lb Initial End Force, 7.2 lb Final End Force, Steel Body

7/32" Inside x 11/32" OD, 10" OAL, Nitride Coated Die Steel, Die & Mold Ejector Sleeve Steel, 122mm Pin Length

Clamp Intensifier Cylinders; Operating Stroke Length (Inch): 1/4; Pressure Ratio: 8:1; Maximum Operating Pressure (psi): 125.00; Minimum Operating Pressure (psi): 25.00; Maximum Output Force (Lb.): 950.00; Body Diameter (Inch): 1-3/4; Body Thread Size: 1-

Rare Earth Disc & Cylinder Magnets; Rare Earth Metal Type: Neodymium Rare Earth ; Diameter (Inch): 0.25in ; Overall Height: 0.5in ; Height (Inch): 0.5in ; Maximum Pull Force: 1.9lb ; Maximum Operating Temperature: 2480F

Straight Ejector Pin: 3 mm Pin Dia, 400 mm OAL, Steel 6 mm Head Dia, 3 mm Head Height, 397 mm Pin Length

Equal Double Threaded Stud: 3/4-10 Thread, 5-1/2" OAL Alloy Steel, Black Oxide Finish, Class 2A

Live Center: Morse Taper Shank, 2.9921" Head Length 5,511.56 lb Workpiece Weight, 5,000 Max RPM, Standard Point