Packaging & Shipping Supplies

25mm Plunger Diam, Knob Handle Indexing Plunger Plunger Style A, 73mm Body Length, 130mm OAL

Soft Lathe Chuck Jaw: Tongue & Groove 4" OAH, Cast Iron

Sliding Arm Bar Clamp: 6-7/8" Throat Depth 5,000 lb Clamping Pressure, 7/8" Spindle Dia

12mm Nose Diam, 9mm Nose Length, Ball Straight Locating Pin Stainless Steel, 8mm Tail Diam, 8mm Tail Length, 20mm OAL, -0.01, -0.05mm Tolerance

14" Long x 14" Wide Aluminum Fixture Plate 1" Plate Thickness

500 Max Pull Force Lb, 5-1/4" Long x 1-7/8" Wide x 2-1/4" Thick, End Mount, Ceramic Fixture Magnet 480°F Max Operating Temp, Grade 8 Ceramic, Steel Housing

Lathe Rests; Rest Type: Follow Rest; Minimum Workpiece Diameter (mm): 0.0393 in; Minimum Workpiece Diameter (Inch): 0.0393; Maximum Workpiece Diameter: 2.16 in; Machine Compatibility: Palmgren 7 & 9 Inch Lathes; Maximum Workpiece Diameter (Decimal Inch):

3/8-24, 24mm Thread Length, 5mm Plunger Diam, Locking Pin Knob Handle Indexing Plunger Plunger Style K, 24mm Body Length, 37mm OAL, Stainless Steel

Threaded Rod: 5/16-24, 2" Long, Stainless Steel, Grade 304 UNF, Right Hand Thread

M10x1, 8mm Thread Length, 5mm Plunger Diam, Locking Pin Knob Handle Indexing Plunger Plunger Style A, 15mm Body Length, 34.5mm OAL, Stainless Steel

3/4-10, 25mm Thread Length, 10mm Plunger Diam, Locking Pin Knob Handle Indexing Plunger Plunger Style A, 40mm Body Length, 79mm OAL, Stainless Steel

Bench Vise: 4" Jaw Width, 4-1/2" Jaw Opening, 2-1/2" Throat Depth Swivel, Drop Forged Steel

Threaded Spring Plunger: 5/16-18, 0.8661" Thread Length, 0.1378" Dia, 0.1181" Projection Steel Body, Locking Element

Hard Lathe Chuck Jaw: Quick Change 1'' OAH, 1.8'' OAL, Aluminum

M8x1, 6mm Thread Length, 4mm Plunger Diam, Locking Pin Knob Handle Indexing Plunger Plunger Style C, 12mm Body Length, 29.5mm OAL, Stainless Steel

C-Clamps; Clamp Type: C-Clamps ; Body Material: Forged Steel ; Anvil Material: Copper Plated ; Clamping Pressure: 6900 ; Clamp Material: Forged Steel ; Maximum Opening Capacity (Decimal Inch): 6.0000