Mig Welding

21 Series Nozzles, Tapered, Self-Insulated, 1/8".Tip Recess,3/8", for No. 1 GunFeaturesFor traditional style guns

Quik Tip™ MIG Contact Tip, 0.035 in WireFeaturesDesigned with threaded taper lock that increases tip life by providing excellent heat transfer and electrical conductivityA quick twist is all it takes to install these tips. In case of burn back, another...

Smoke Master 450 Air Cooled MIG Guns, 450 A, 15 ft, Lincoln, 1/16 in WireFeaturesEfficiently removes up to 90% of smoke from the welding zoneTough outer jacket made of full length leather for increased flexibility and enhanced cable life

Contact Tip, TW 14FC-045FeaturesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surfaceThreaded style contact tip to ensure proper contact with a gas diffuser when installed to the MIG gunReliable

Contact Tip, 0.12 in Tip, TW 16S-764FeaturesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surfaceThreaded style contact tip to ensure proper contact with a gas diffuser when installed to the MIG gunReliable

Contact Tip, TW 14FC-068FeaturesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surfaceThreaded style contact tip to ensure proper contact with a gas diffuser when installed to the MIG gunReliable

No. 4 Air Cooled MIG Guns, , , - WireFeaturesWide selection of front end consumables available to fit the needs of the applicationIndustry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun positionBalanced to pivot...

Spray Master 450 Air Cooled MIG Guns, 450 A, 15 ft, Miller, 9/200" - 1/16" WireFeaturesThick-walled, three-layer conductor tube for higher electrical conductivity, act as “heat sink”Heavy-duty thick-walled contact tip and diffuser increases tip life and...

No. 3 Traditional Style MIG Guns, 12 ft, Miller, 0.035 in - 0.045 in WireFeaturesIndustry standardMetal jacket conductor tubeEnhanced direct plug capabilities

22 Series Nozzles, Short-Stop, 1/8 in. Tip Recess, 1/2 in, For No. 2 GunFeaturesFor traditional style guns

Wire Conduits, 3/32 in x 15 ftFeaturesFor all guns (Eliminator®, Traditional and Spray Master™ styles)Tweco Universal Conduit liner is ready to use right out of the boxEach conduit liner wire has a crimped wire guide that is universal common to all...

No. 1 Traditional Style MIG Guns, 180 A, 15 ft, Miller, 0.03 in - 0.035 in WireFeaturesNeoprene insulated quick-change conductor tube swivels 360 degreesGun hanger located at the bottom for ease of resting gun when not in use

Eliminator Style Nozzles, 1/8 in. Tip Recess Slip On, 3/4 inFeaturesUsed for higher heat applications where longer electrical stick-out is requiredGood for applications where the nozzle may touch the work piece (tack, spot, and stitch)

Standard Nozzle Insulator, Brass, For 22 Series Gas NozzleFeaturesField repairable cable connectionSteel spring strain reliefsOne-piece molded handle for high impact strength

Velocity™ Light Duty Contact Tip, .035 in, VTS-35FeaturesThe Velocity contact tip remains coolerA cooler tip extends the life of the tip resulting in fewer tip changes, and less tip usage, and increase productivity and lowers total cost of usage, with up...

Contact Tip, 0.052 in Wire, 0.064 in Tip, Standard HD, 16SFeaturesFor traditional & Spray Master™ gunsExcellent electrical propertiesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surface