Mig Welding

Contact Tip, 0.045 in Wire, 0.054 in Tip, Optional Tapered, No. 2, 3, and 4 GunsFeaturesThreaded style contact tipFor traditional & Spray Master™ gunsEasy identification—each contact tip is marked with part number and wire diameter

No. 3 Traditional Style MIG Guns, 15 ft, Lincoln, 0.035 in - 0.045 in WireFeaturesIndustry standardMetal jacket conductor tubeEnhanced direct plug capabilities

No. 4 Air Cooled MIG Guns, 400 A, 20 ft, Tweco, 0.035 - 0.045 in WireFeaturesWide selection of front end consumables available to fit the needs of the applicationIndustry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG...

Eliminator® Style Contact Tip, 0.035 in Wire, 0.44 in Tip, Heavy-Duty Contact Tip, ThreadedFeaturesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surfacePatented contact tip providing a cam style connection into the...

Body with Screw, For Use With Q-Guns, ShortstubFeaturesCenterfire consumable series Contact Tips, Gas Diffusers, Nozzles, and Tapered Contact Tips are machined to the highest quality for extended service lifeAdapter Heads and Insulator Caps are available...

Eliminator Style Diffusers, 360 Brass Alloy, For Tweco 250 Eliminator MIG GunsFeaturesUse in light to medium duty welding applicationsConstructed to ensure consistent dimensional stabilitySilicon O-ring seals against the nozzle assembly

Eliminator Style Nozzles, Heavy Duty 1/8 in. Tip Recess, 5/8 in, ForFeaturesUsed for higher heat applications where longer electrical stick-out is requiredGood for applications where the nozzle may touch the work piece (tack, spot, and stitch)

Contact Tip, TW 16FC-120FeaturesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surfaceThreaded style contact tip to ensure proper contact with a gas diffuser when installed to the MIG gunReliable

Contact Tip, 0.035 in Wire, 0.044 in Tip, Standard RecessFeaturesFor traditional & Spray Master™ guns

Insulators, For Extreme Angle-Arc K4000 TorchFeaturesPermits lower operating temperatures to avoid overheatingImproves nozzle seal

Centerfire Cap, 1-1/40 in L, RubberFeaturesThis insulator cap can be used to convert competitors' MIG guns for use with Centerfire™ consumable seriesFor use with Centerfire(TM) Contact Tips, Diffusers and Nozzles

Eliminator Style Nozzles, Tip Flush, 5/8 inFeaturesUsed for higher heat applications where longer electrical stick-out is requiredGood for applications where the nozzle may touch the work piece (tack, spot, and stitch)

Robotics MIG Gun & Cable Assemblies, 400A, 15ft, Tweco, 0.035-0.045in Wire, AirFeaturesEngineered to withstand the high duty cycles required for automated weld cellsConductor tubes are keyed into the brass body allowing for the tube to removed and...

Contact Tip, 0.023 in Wire, 0.031 in Tip, Standard, MS250, Mini and No. 1 GunsFeaturesMachined from a chrome zirconium copper tubing providing a consistent and smooth inside diameter surfaceThreaded style contact tip to ensure proper contact with a gas...

Heavy Duty Contact Tip, 0.052 in Wire, 0.064 in Tip, Optional Heavy Duty, 14HFeaturesEasy identification - Each contact tip is marked showing Part No. and wire diameterExcellent electrical propertiesInside diameter tolerance is held to +/-.003 inMachined...

Heavy Duty Contact Tip, 0.045 in Wire, 0.054 in Tip, Optional Heavy Duty, 14HFeaturesEasy identification - Each contact tip is marked showing Part No. and wire diameterExcellent electrical propertiesInside diameter tolerance is held to +/-.003 inMachined...