Mig Welding

WeldSkill Conduit Liners, 0.030 in - 0.035 in x 25 ft, 180A-250AFeaturesZinc plated spring wire to minimize corrosion on the metal surfaceEach wire conduit has a brass alloy machined stop on the back endEasy identification - Part No. rolled stamped on...

WeldSkill® Air Cooled MIG Gun, 400 A, 15 ft, Miller® Style Rear Connection, 0.030 in to 1/16 in WireFeaturesFiber insulated conductor tubeThree-wire cable hoseFor use with standard Tweco® consumables

MIG Torch Gun Diffusers, For No. 1 Gun, 180 AFeaturesFor traditional style gunsReliable

No. 4 Traditional Style MIG Guns, 15 ft, Lincoln, 0.035 in - 0.045 in WireFeaturesIndustry standardMetal jacket conductor tubeEnhanced direct plug capabilities

WeldSkill Conduit Liner, 0.052 in to 1/16 in Wire, 15 ft LFeaturesZinc plated spring wire to minimize corrosion on the metal surfaceEach wire conduit has a brass alloy machined stop on the back endEasy identification - Part No. rolled stamped on the...

Centerfire Nozzles, 3/4 in, For Mig GunsFeaturesFeatures built-in spatter shield that smooths and concentrates gas flow for less weld oxidation and contaminationEasy-to-use and high performingProvides better arc starts, less spatter and more consistent...

Centerfire Diffusers, For Tweco/Spray Master/Supra XT/Lincoln MagnumFeaturesGas diffusers have positive stops to secure Quik Tip™ contact tips in a fixed position for superior repeatability and consistent quality weldsQuik Tip™ consumables are suitable...

24 Series Nozzles, Short-Stop, 1/8 in. Tip Recess, 3/8 in, For No. 4 GunFeaturesUsed in heavy duty welding application up to 450 amperesEasy identification, Part No. rolled stamped on the outside surface3-piece design, does not require an additional...

Robotics Conductor Tubes, 600A, 22°, Water-CooledFeaturesStainless steel outer jacket insulated from the inner tube by a PTFE sleeve providing excellent di-electric propertiesOuter jacket contains a nozzle housing with a thermally conductive insulator to...

Robotics Conduit Liners, 0.052 in-1/16in x 4ft, For 300-450A Robotic R44 Mig GunFeaturesZinc plated spring wire to minimize corrosion on the metal surfaceEach wire conduit has a brass alloy machined stop on the back endDesigned to be used with robotic...

Liner Assemblies, PCH/M-68, 400AFeaturesLiner AssemblyStyle PCH/M-68

Classic 4 Air Cooled MIG Gun, 400 A, 15 ft, Lincoln® Style Rear Connection, 0.023 in to 0.045 in WireFeaturesIndustry standardMetal jacket conductor tubeEnhanced direct plug capabilities

Robotics Conductor Tubes, QTRW64-22L, 400A, 22°, Long, Water-CooledFeaturesStainless steel outer jacket insulated from the inner tube by a PTFE sleeve providing excellent di-electric propertiesOuter jacket contains a nozzle housing with a thermally...

24 Series Nozzles, Coarse Thread, 1/8 in. Tip Recess, 3/4 in, For No. 4 GunFeaturesUsed in heavy duty welding application up to 450 amperesEasy identification, Part No. rolled stamped on the outside surface3-piece design, does not require an additional...

Standard Nozzle Insulator, Brass, For 24CT Series Coarse Thread NozzleFeaturesField repairable cable connectionSteel spring strain reliefsOne-piece molded handle for high impact strength

Elliptical Contact Tip, 0.035 in Wire, 2 inFeaturesElliptical contact tip engages the wall of the gas diffuser locking firmly into place with a 1/4 in turnElliptical tips have a much longer surface area for electrical and heat transfer than fine threaded...