Mig Welding

WeldSkill Contact Tip, 0.044 in TipFeaturesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surfacePatented contact tip providing a cam style connection into the mating gas diffuser

Centerfire™ MIG Nozzle, 1/8 in Recess, 5/8 in Bore, For T Series Tip,FeaturesFeatures built-in spatter shield that smooths and concentrates gas flow for less weld oxidation and contaminationEasy-to-use and high performingProvides better arc starts, less...

No. 2 Traditional Style MIG Guns, 15 ft, Euro-Kwik, 0.04 in - 0.045 in WireFeaturesIndustry standardMetal jacket conductor tubeEnhanced direct plug capabilities

Heavy Duty Contact Tip, 3/64 in Wire, 0.059 in Tip, Optional Heavy DutyFeaturesEasy identification - Each contact tip is marked showing Part No. and wire diameterExcellent electrical propertiesInside diameter tolerance is held to +/-.003 inMachined from...

Spray Master 250 Air Cooled MIG Guns, 250 A, 12', Lincoln, 0.035 - 0.045 in WireFeaturesThick-walled, three-layer conductor tube for higher electrical conductivity, act as “heat sink”Heavy-duty thick-walled contact tip and diffuser increases tip life and...

MIG Torch Gun Diffusers, For No. 2 Gun; No. 3 & 4 NozzlesFeaturesFor traditional style gunsReliable

WeldSkill Contact Tip, 0.064 in Tip, TW WS14-52FeaturesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surfacePatented contact tip providing a cam style connection into the mating gas diffuser

Compact Eliminator® Air Cooled MIG Guns, 450 A, 25 ft, Miller® Style Rear Connector, Up to 1/16 in WireFeaturesFront and rear spring strain relief and cable supportCompact, ergonomic handle designDurable metal jacketed conductor tubePatented, extended...

Mig Contact Tip, 0.035 in Wire, 0.044 in Tip, 16STFeaturesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surfaceThreaded style contact tip to ensure proper contact with a gas diffuser when installed to the MIG...

Contact Tip, 0.035 in Wire, 0.044 in Tip, Standard HD, 16SFeaturesFor traditional & Spray Master™ gunsExcellent electrical propertiesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surface

Conductor Tubes, For No. 250 Gun, 45°FeaturesFor Weldskill® gunsReliable

Standard 600 Water Cooled MIG Guns, 600 A, 15 ft, Tweco, 1/16 in WireFeaturesFully assembledReady-to-use MIG-Gun

Wire Conduits, 1/16 in x 15 ftFeaturesFor all guns (Eliminator®, Traditional and Spray Master™ styles)Tweco Universal Conduit liner is ready to use right out of the boxEach conduit liner wire has a crimped wire guide that is universal common to all...

Quik Tip Consumables Nozzles, Threaded, 1/2", For Quik Tip Series 1 Contact TipFeaturesFeatures a removable nozzle cone that lowers downtime and consumable costs by allowing operators to replace only the cone without removing and replacing the entire...

Weldskill Nozzles, 5/8",Part Nos. EL34CT,34CT,EL54CT-SW,EL54CT-H,54P,54A,54A-16FeaturesUsed in medium to heavy duty welding application up to 450 amperesNozzle housing is cut and formed from copper alloy tubingPart No. rolled stamped on the outside...

Heavy Duty Contact Tip, 0.144 in Tip, TW 15H-18FeaturesEasy identification - Each contact tip is marked showing Part No. and wire diameterExcellent electrical propertiesInside diameter tolerance is held to +/-.003 inMachined from a copper alloy tubing...