Mig Welding

Mig Contact Tip, 0.045 in Wire, 0.064 in Tip, 14FeaturesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surfaceThreaded style contact tip to ensure proper contact with a gas diffuser when installed to the MIG gunEasy...

Elliptical Contact Tip, 0.045 in Wire, 7400 Series, Non-ThreadedFeaturesElliptical contact tip engages the wall of the gas diffuser locking firmly into place with a 1/4 in turnElliptical tips have a much longer surface area for electrical and heat...

Conductor Tube Extensions, For No. 5 Gun, 60°FeaturesFor traditional style gunsReliable

Insulations, For Mini-MIG GunFeatures

23 Series Nozzles, Self-Insulated, Tip Flush, 1/2 in, For No. 3 GunFeaturesFor traditional style gunsNozzle threads onto the conductor tube assembly

No. 4 Air Cooled MIG Guns, 400 A, 25 ft, Miller, 1/16 in WireFeaturesWide selection of front end consumables available to fit the needs of the applicationIndustry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun...

No. 4 Air Cooled MIG Guns, 400 A, 25 ft, Tweco, 0.035 - 0.045 in WireFeaturesWide selection of front end consumables available to fit the needs of the applicationIndustry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG...

24 Series Nozzles, Short-Stop, 1/8 in. Tip Recess, 3/4 in, For No. 4 GunFeaturesUsed in heavy duty welding application up to 450 amperesEasy identification, Part No. rolled stamped on the outside surface3-piece design, does not require an additional...

24 Series Nozzles, Coarse Thread, Tip Flush, 5/8 in, For No. 4 GunFeaturesUsed in heavy duty welding application up to 450 amperesEasy identification, Part No. rolled stamped on the outside surface3-piece design, does not require an additional insulator

No. 4 Air Cooled MIG Guns, 400 A, 15 ft, Miller, 5/64 in WireFeaturesWide selection of front end consumables available to fit the needs of the applicationIndustry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun...

No. 2 Traditional Style MIG Guns, 15 ft, Lincoln, 0.03 in - 0.0354 in WireFeaturesIndustry standardMetal jacket conductor tubeEnhanced direct plug capabilities

MIG Torch Gun Diffuser, 360 Brass Alloy, For No. 400 GunFeaturesFor traditional style gunsReliable

Robotics Conductor Tubes, WRS66-180, 600A, 180°, Water-CooledFeaturesStainless steel outer jacket insulated from the inner tube by a PTFE sleeve providing excellent di-electric propertiesOuter jacket contains a nozzle housing with a thermally conductive...

Wire Conduits, 0.03 in-0.035 in x 10 ftFeaturesFor all guns (Eliminator®, Traditional and Spray Master™ styles)Tweco Universal Conduit liner is ready to use right out of the boxEach conduit liner wire has a crimped wire guide that is universal common to...

Classic 4 Air Cooled MIG Gun, 400 A, 15 ft, Miller® Style Rear Connection, 0.023 in to 0.045 in WireFeaturesIndustry standardMetal jacket conductor tubeEnhanced direct plug capabilities

WeldSkill Contact Tip, 0.045 in Wire, 0.054 in Tip, TaperedFeaturesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surfacePatented contact tip providing a cam style connection into the mating gas diffuser