Mig Welding

Nozzle Assemblies, Flush, Recessed, 5/8 in Bore, For Q-Gun/S-Gun, BrassFeaturesFeatures a removable nozzle cone that lowers downtime and consumable costs by allowing operators to replace only the cone without removing and replacing the entire...

Insulations, Insulation, For No. 1 GunFeatures

Eliminator Style Nozzles, 1/8 in. Tip Recess Slip On, 5/8 inFeaturesUsed for higher heat applications where longer electrical stick-out is requiredGood for applications where the nozzle may touch the work piece (tack, spot, and stitch)

Contact Tip, 0.048 in Tip, TW 14T-40FeaturesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surfaceThreaded style contact tip to ensure proper contact with a gas diffuser when installed to the MIG gunReliable

24 Series Nozzles, SS Tapered, 1/8 in. Tip Recess, 3/8 in, For No. 4 GunFeaturesUsed in heavy duty welding application up to 450 amperesEasy identification, Part No. rolled stamped on the outside surface3-piece design, does not require an additional...

Centerfire™ MIG Contact Tip, 0.039 in Wire, T-039, Non-Threaded, Tapered BaseFeaturesDesign allows quick, tool-free replacementCan be rotated 360 degrees to create new wear surfaces and extended tip lifeNon-threaded and stays in place by hand-tightening...

24 Series Nozzles, Heavy Duty, Adjustable, 3/4 in, For No. 4 GunFeaturesUsed in heavy duty welding application up to 450 amperesEasy identification, Part No. rolled stamped on the outside surface3-piece design, does not require an additional insulator

Contact Tip, 0.045 in Wire, 0.054 in Tip, Optional 3/8" RecessFeaturesFor traditional & Spray Master™ guns

Conductor Tube Extensions, For No. 5 Gun, 4 in, 180°FeaturesFor traditional style gunsReliable

Contact Tip, 0.045 in Wire, 0.054 in Tip, Optional TaperedFeaturesThreaded style contact tipFor traditional & Spray Master™ gunsEasy identification—each contact tip is marked with part number and wire diameter

Wire Conduits, 0.023 in x 15 ftFeaturesFor all guns (Eliminator®, Traditional and Spray Master™ styles)Tweco Universal Conduit liner is ready to use right out of the boxEach conduit liner wire has a crimped wire guide that is universal common to all...

WeldSkill Conduit Liners, 0.040 in - 0.045 in x 25 ft, 180A-250AFeaturesZinc plated spring wire to minimize corrosion on the metal surfaceEach wire conduit has a brass alloy machined stop on the back endEasy identification - Part No. rolled stamped on...

WeldSkill Contact Tip, 0.044 in TipFeaturesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surfacePatented contact tip providing a cam style connection into the mating gas diffuser

Centerfire™ MIG Nozzle, 1/8 in Recess, 5/8 in Bore, For T Series Tip,FeaturesFeatures built-in spatter shield that smooths and concentrates gas flow for less weld oxidation and contaminationEasy-to-use and high performingProvides better arc starts, less...

Heavy Duty Contact Tip, 3/64 in Wire, 0.059 in Tip, Optional Heavy DutyFeaturesEasy identification - Each contact tip is marked showing Part No. and wire diameterExcellent electrical propertiesInside diameter tolerance is held to +/-.003 inMachined from...

MIG Torch Gun Diffusers, For No. 2 Gun; No. 3 & 4 NozzlesFeaturesFor traditional style gunsReliable