Mig Welding

Quik Tip Consumables Nozzles, Threaded, 3/8", For Quik Tip Series 2 Contact TipFeaturesFeatures a removable nozzle cone that lowers downtime and consumable costs by allowing operators to replace only the cone without removing and replacing the entire...

Wire Conduit, 0.03 in to 0.035 in Wire, 15 ft LFeaturesFor all guns (Eliminator®, Traditional and Spray Master™ styles)Tweco Universal Conduit liner is ready to use right out of the boxEach conduit liner wire has a crimped wire guide that is universal...

Quik Tip™ MIG Contact Tip, 0.045 in Wire, Series 1, ThreadedFeaturesDesigned with threaded taper lock that increases tip life by providing excellent heat transfer and electrical conductivityA quick twist is all it takes to install these tips. In case of...

Mig Nozzles, Heavy Duty Elliptical Series, 3/4 in Bore, CopperFeaturesEasy-to-use and efficient performanceProvide better arc starts, less spatter and more consistent welds

Eliminator Style Compact MIG Guns, 450 A/60%, 15 ft, TwecoFeaturesDurable metal jacketed conductor tubePatented, extended life consumablesFront and rear spring strain relief and cable support

Contact Tip, 7/64 in Wire, 0.12 in Tip, Standard RecessFeaturesFor traditional & Spray Master™ guns

Contact Tip, 3/32 in Wire, 0.106 in Tip, Standard HDFeaturesFor traditional & Spray Master™ gunsExcellent electrical propertiesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surface

Mig Contact Tip, 0.045 in Wire, 0.064 in Tip, 14FeaturesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surfaceThreaded style contact tip to ensure proper contact with a gas diffuser when installed to the MIG gunEasy...

Elliptical Contact Tip, 0.045 in Wire, 7400 Series, Non-ThreadedFeaturesElliptical contact tip engages the wall of the gas diffuser locking firmly into place with a 1/4 in turnElliptical tips have a much longer surface area for electrical and heat...

Conductor Tube Extensions, For No. 5 Gun, 60°FeaturesFor traditional style gunsReliable

Insulations, For Mini-MIG GunFeatures

23 Series Nozzles, Self-Insulated, Tip Flush, 1/2 in, For No. 3 GunFeaturesFor traditional style gunsNozzle threads onto the conductor tube assembly

No. 4 Air Cooled MIG Guns, 400 A, 25 ft, Miller, 1/16 in WireFeaturesWide selection of front end consumables available to fit the needs of the applicationIndustry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun...

No. 4 Air Cooled MIG Guns, 400 A, 25 ft, Tweco, 0.035 - 0.045 in WireFeaturesWide selection of front end consumables available to fit the needs of the applicationIndustry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG...

24 Series Nozzles, Short-Stop, 1/8 in. Tip Recess, 3/4 in, For No. 4 GunFeaturesUsed in heavy duty welding application up to 450 amperesEasy identification, Part No. rolled stamped on the outside surface3-piece design, does not require an additional...

24 Series Nozzles, Coarse Thread, Tip Flush, 5/8 in, For No. 4 GunFeaturesUsed in heavy duty welding application up to 450 amperesEasy identification, Part No. rolled stamped on the outside surface3-piece design, does not require an additional insulator