Mig Welding

Eliminator® Style Nozzle, 1/8 in, 5/8 in boreFeaturesUsed for higher heat applications where longer electrical stick-out is requiredGood for applications where the nozzle may touch the work piece (tack, spot, and stitch)

Eliminator Style Nozzles, 1/8 in. Tip Recess, 3/8 inFeaturesUsed for higher heat applications where longer electrical stick-out is requiredGood for applications where the nozzle may touch the work piece (tack, spot, and stitch)

Wire Conduits, 0.035 in-0.045 in x 15 ft, No. 5, 6 and 600 Eliminator Mig GunFeaturesFor all guns (Eliminator®, Traditional and Spray Master™ styles)Tweco Universal Conduit liner is ready to use right out of the boxEach conduit liner wire has a crimped...

No. 4 Air Cooled MIG Guns, 400 A, 25 ft, Tweco, 0.045 in - 1/16 in WireFeaturesWide selection of front end consumables available to fit the needs of the applicationIndustry standard for 40+ years, oval shaped handle reduces grip required to manipulate...

Centerfire Nozzles, 1/4 in Tip Recess, 3/4 in Bore, For BTB Series, CopperFeaturesFeatures built-in spatter shield that smooths and concentrates gas flow for less weld oxidation and contaminationEasy-to-use and high performingProvides better arc starts,...

No. 4 Traditional Style MIG Guns, 400 A, 15 ft, Miller, 0.045 in - 1/16 in WireFeaturesIndustry standardMetal jacket conductor tubeEnhanced direct plug capabilities

WeldSkill® Air Cooled MIG Gun, 15 ft, Tweco, 0.045 in WireFeaturesFiber insulated conductor tubeThree-wire cable hoseFor use with standard Tweco® consumables

25 Series Nozzles, Coarse Thread, 1/8 in. Tip Recess, 1/2 in, For No. 5 GunFeaturesFor traditional style guns

No. 2 Air Cooled MIG Guns, 200 A, 20 ft, Tweco, 0.03-0.035 in WireFeaturesWide selection of front end consumables available to fit the needs of the applicationIndustry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun...

WeldSkill Conduit Liners, 5/64 in x 15ft, 300A-450AFeaturesZinc plated spring wire to minimize corrosion on the metal surfaceEach wire conduit has a brass alloy machined stop on the back endEasy identification - Part No. rolled stamped on the outside...

WeldSkill Conduit Liners, 1/16 in x 15 ft, 300A-450AFeaturesZinc plated spring wire to minimize corrosion on the metal surfaceEach wire conduit has a brass alloy machined stop on the back endEasy identification - Part No. rolled stamped on the outside...

24 Series Nozzles, Adjustable, Recess To Projection, 3/4 in, For No. 4 GunFeaturesUsed in heavy duty welding application up to 450 amperesEasy identification, Part No. rolled stamped on the outside surface3-piece design, does not require an additional...

Spray Master Air-Cooled Mig Guns, 350 A, 12 ft, Tweco, 0.045 in - 1/16 in WireFeaturesThick-walled, three-layer conductor tube for higher electrical conductivity, acts as “heat sink” and is durableHeavy-duty, thick-walled contact tip and diffuser...

24 Series Nozzles, Short-Stop, 1/8 in. Tip Recess, 5/8 in, For No. 4 GunFeaturesUsed in heavy duty welding application up to 450 amperesEasy identification, Part No. rolled stamped on the outside surface3-piece design, does not require an additional...

No. 2 Traditional Style MIG Guns, 12 ft, Tweco, 0.03 in - 0.035 in WireFeaturesIndustry standardMetal jacket conductor tubeEnhanced direct plug capabilities

WeldSkill Contact Tip, 0.035 in Wire, 0.044 in Tip, Tapered, .250-28 UNF ThreadsFeaturesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surfacePatented contact tip providing a cam style connection into the mating gas...