Mig Welding

Spray Master 450 Air Cooled MIG Guns, 450 A, 15 ft, Lincoln, 1/16 in WireFeaturesThick-walled, three-layer conductor tube for higher electrical conductivity, act as “heat sink”Heavy-duty thick-walled contact tip and diffuser increases tip life and...

Centerfire™ MIG Contact Tip, 0.045 in Tip ID, 2 in Long, WireFeaturesDesign allows quick, tool-free replacementCan be rotated 360 degrees to create new wear surfaces and extended tip lifeNon-threaded and stays in place by hand-tightening the...

Wire Conduits, 0.035"-0.045" x 25', No. 3/4 Eliminator/SprayMaster, No. 5 X-GunFeaturesFor all guns (Eliminator®, Traditional and Spray Master™ styles)Tweco Universal Conduit liner is ready to use right out of the boxEach conduit liner wire has a crimped...

Contact Tip, 0.048 in Tip, TW 16S-40FeaturesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surfaceThreaded style contact tip to ensure proper contact with a gas diffuser when installed to the MIG gunReliable

Handle, For Use With Q-GunsFeaturesCenterfire consumable series Contact Tips, Gas Diffusers, Nozzles, and Tapered Contact Tips are machined to the highest quality for extended service lifeAdapter Heads and Insulator Caps are available to convert...

Quick Tip™ MIG Nozzle, Threaded, 5/8 in Bore, For Series 1 Tip, Plated CopperFeaturesFeatures a removable nozzle cone that lowers downtime and consumable costs by allowing operators to replace only the cone without removing and replacing the entire...

Gas Diffusers/Heads, Head Assembly, For 600A Q-GunFeaturesHeavy-duty gas diffusers for greater heat dissipationAllows smooth gas flow and longer life

Standard Nozzle Insulator, For A-316; A-532 Electrode HolderFeaturesField repairable cable connectionSteel spring strain reliefsOne-piece molded handle for high impact strength

Contact Tip, TW 16FC-564FeaturesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surfaceThreaded style contact tip to ensure proper contact with a gas diffuser when installed to the MIG gunReliable

Contact Tip, 0.03 in Wire, 0.038 in Tip, Optional TaperedFeaturesThreaded style contact tipFor traditional & Spray Master™ gunsEasy identification—each contact tip is marked with part number and wire diameter

Contact Tip, 1/16 in Wire, 0.073 in Tip, Standard HD, 16SFeaturesFor traditional & Spray Master™ gunsExcellent electrical propertiesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surface

Elliptical Gas Diffusers/Head, 0.035 in to 0.052 in wire, BrassFeaturesHeavy-duty gas diffusers for greater heat dissipationAllows smooth gas flow and longer life

No. 4 Air Cooled MIG Guns, 400 A, 25 ft, Miller, 0.035 in - 0.045 in WireFeaturesWide selection of front end consumables available to fit the needs of the applicationIndustry standard for 40+ years, oval shaped handle reduces grip required to manipulate...

Eliminator Style Contact Tip, 1/16 in Wire, 0.073 in Tip, Standard, EL16FeaturesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surfacePatented contact tip providing a cam style connection into the mating gas diffuser

Conductor Tubes, MINI-MIG Gun, 60°FeaturesFor Weldskill® gunsReliable

Tweco Robotics TJ-2 TRI-JUST MIG Gun Holding Fixture (1-7/8 IN)FeaturesHolding fixture that can accept up to 1 7/8 inLight weight and durableAll parts are machined from aluminum bar stock and or aluminum extrusion