Mig Welding

Centerfire™ MIG Nozzle, 1/8 in Recess, 5/8 in Bore, For T Series Tip, CopperFeaturesFeatures built-in spatter shield that smooths and concentrates gas flow for less weld oxidation and contaminationEasy-to-use and high performingProvides better arc...

23 Series Nozzles, Heavy Duty Self-Insulated,1/8" Tip Recess,3/4", For No. 3 GunFeaturesFor traditional style gunsNozzle threads onto the conductor tube assembly

Eliminator Style Nozzles, 1/8 in. Tip Recess, 5/8 in, ForFeaturesUsed for higher heat applications where longer electrical stick-out is requiredGood for applications where the nozzle may touch the work piece (tack, spot, and stitch)

Eliminator Style Nozzles, 1/8 in. Tip Recess, 3/8 inFeaturesUsed for higher heat applications where longer electrical stick-out is requiredGood for applications where the nozzle may touch the work piece (tack, spot, and stitch)

MIG Contact Tip, 0.035 in, Tweco® Style, StandardFeaturesWorks with Best Welds® gas diffuser or equivalent OEM MIG gunsIndustry part number easily recognizableDurable and precise

No. 5 Traditional Style MIG Guns, 15 ft, Miller, 0.045 in - 1/16 in WireFeaturesIndustry standardMetal jacket conductor tube with high heat insulationEnhanced direct plug capabilities5" radius conductor tube

Spray Master 450 Air Cooled MIG Guns, 450 A, 15 ft, Lincoln, 1/16 in WireFeaturesThick-walled, three-layer conductor tube for higher electrical conductivity, act as “heat sink”Heavy-duty thick-walled contact tip and diffuser increases tip life and...

Centerfire™ MIG Contact Tip, 0.045 in Tip ID, 2 in Long, WireFeaturesDesign allows quick, tool-free replacementCan be rotated 360 degrees to create new wear surfaces and extended tip lifeNon-threaded and stays in place by hand-tightening the...

Wire Conduits, 0.035"-0.045" x 25', No. 3/4 Eliminator/SprayMaster, No. 5 X-GunFeaturesFor all guns (Eliminator®, Traditional and Spray Master™ styles)Tweco Universal Conduit liner is ready to use right out of the boxEach conduit liner wire has a crimped...

Contact Tip, 0.048 in Tip, TW 16S-40FeaturesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surfaceThreaded style contact tip to ensure proper contact with a gas diffuser when installed to the MIG gunReliable

Handle, For Use With Q-GunsFeaturesCenterfire consumable series Contact Tips, Gas Diffusers, Nozzles, and Tapered Contact Tips are machined to the highest quality for extended service lifeAdapter Heads and Insulator Caps are available to convert...

Quick Tip™ MIG Nozzle, Threaded, 5/8 in Bore, For Series 1 Tip, Plated CopperFeaturesFeatures a removable nozzle cone that lowers downtime and consumable costs by allowing operators to replace only the cone without removing and replacing the entire...

Gas Diffusers/Heads, Head Assembly, For 600A Q-GunFeaturesHeavy-duty gas diffusers for greater heat dissipationAllows smooth gas flow and longer life

Standard Nozzle Insulator, For A-316; A-532 Electrode HolderFeaturesField repairable cable connectionSteel spring strain reliefsOne-piece molded handle for high impact strength

Contact Tip, TW 16FC-564FeaturesMachined from a copper alloy tubing providing a consistent and smooth inside diameter surfaceThreaded style contact tip to ensure proper contact with a gas diffuser when installed to the MIG gunReliable

Contact Tip, 0.03 in Wire, 0.038 in Tip, Optional TaperedFeaturesThreaded style contact tipFor traditional & Spray Master™ gunsEasy identification—each contact tip is marked with part number and wire diameter