Locating & Positioning Components

Jig & Flat Feet; Foot Type: Jig ; Thread Size: 1/4 ; Height (Inch): 3/4 ; Outside Diameter (Inch): 5/8

Threaded Spring Plunger: 3/4-10, 1-3/4" Thread Length, 0.374" Dia, 5/16" Projection 6.7 lb Initial End Force, 37.3 lb Final End Force, Steel Body, Locking Element

3/8-16, 1.18" Thread Length, 0.25" Plunger Diam, 0.75 Lb Init to 3.75 Lb Final End Force, Steel L Handle Plunger 1.31" Body Length, 1.87" Length Under Head, 0.56" Plunger Projection

M12x1.75, 0.65" Thread Length, 1/4" Max Plunger Diam, 1 Lb Init to 10 Lb Final End Force, Locking Knob Handle Plunger Countersunk Knob, 16.5mm Body Length, 1/4" Plunger Projection

1/4" Body Diam, 0.3" Body Length, 0.11" Nose Diam, 0.16" Nose Length, Spring Locating Pin 2.2 Lb Final End Force, Aluminum Body, Alloy Steel Nose

Threaded Ball Plunger: M3, 0.0591" Ball Dia, 0.2756" Body Length, 0.0197" Max Ball Reach 5 N Initial End Force, 7 N Final End Force, Steel Body, Steel Ball

M6x1.0, 13mm Thread Length, 0.118" Max Plunger Diam, 0.11 Lb Init to 0.34 Lb Final End Force, Locking Knob Handle Plunger Delrin Knob, 0.63" Body Length, 1/2" Length Under Head/Shoulder, 0.118" Plunger Projection

Modular Fixturing Liners; Liner Type: Primary; System Compatibility: Ball Lock; Outside Diameter (Decimal Inch): 1.7523 in; Inside Diameter (mm): 35 mm; Outside Diameter Tolerance: -0.0004 in; Plate Thickness Tolerance: 10.005 in; Plate Thickness Compatib

Threaded Spring Plunger: #6-32, 17/32" Thread Length, 0.046" Dia, 0.062" Projection 0.5 lb Initial End Force, 1.5 lb Final End Force, Stainless Steel Body

Threaded Spring Plunger: 5/8-11, 1-1/2" Thread Length, 0.31" Dia, 0.312" Projection 10.5 lb Initial End Force, 25.5 lb Final End Force, Steel Body

1.1" Body Len x 1/2" Body Diam, 0.332" Plunger Diam, 8 Lb Init to 18 Lb Final End Force, 1.1" Len Under Flange, Stainless Steel Press Fit Spring Plunger 11/16" Flange Diam, 0.134" Flange Thickness, 1.234" Plunger Len, 1/4" Plunger Projection

Threaded Spring Plunger: M4 x 0.7, 16 mm Thread Length, 1.78 mm Dia, 2.5 mm Projection Steel Body

M6x1.0, 0.8" Thread Length, 4mm Plunger Diam, 6.4mm Plunger Projection, 4.4 N Init to 11 N Final End Force, Steel Locking Pull Ring Plunger 20.3mm Len Under Head, 29mm Body Len, 16mm Ring Diam, 1.1" Plunger Len, 0.3" Head Height

M12x1.75, 0.65" Thread Length, 1/4" Max Plunger Diam, 0.5 Lb Init to 4 Lb Final End Force, Locking Knob Handle Plunger Knurled Knob, 17mm Body Length, 0.9" Length Under Head/Shoulder, 1/4" Plunger Projection

50 Electrode Capacity, 100 to 300°F, Portable Electrode Stabilizing Welding Rod Oven AC Input Current, 120/240 Volt, 300 Watt, 15 Inch Wide x 20 Inch Deep x 27 Inch High, Digital Thermometer

Threaded Spring Plunger: 1/2-13, 1-1/4" Thread Length, 0.248" Dia, 1/4" Projection 6.6 lb Initial End Force, 17.4 lb Final End Force, Steel Body, Locking Element