Lathe Chucks, Centers, Cylinders & Rests

M12x1.75 Stem, 1.02" Knob Diam, 0.55" Shaft Diam, Type E Gear Lever Arm with Cylindrical Knob 0.63" Thread Length, 5.91" Handle Length, Stainless Steel Shaft, Phenolic Knob

1/2" Wide x 0.06" High, Self Adhesive Polyurethane Bumpers Tapered Cylindrical

Studded Leveling Mount: 3/4-10 Thread 13,000 lb Load Capacity, 9" Base Dia, Neoprene Pad, Steel Stud

Ball Knob: Female Insert, 1-3/8'' Dia Phenolic, Black

O-Ring: 5" ID x 5-1/4" OD, 1/8" Thick, Dash 250, Silicone Round Cross Section

O-Ring: 0.25" ID x 0.5" OD, 0.139" Thick, Dash 202, Nitrile Butadiene Rubber 1/8" Thick, Durometer 90 DURO O-RING, -40 to 250°F

Threaded Stud Adjustable Clamping Handle: M8 x 1.25 Thread, 18 mm Hub Dia, Die Cast Zinc, Black 25 mm Stud Length, 64 mm Handle Length

Studded Leveling Mount: #1-8 Thread 1,180 lb Load Capacity, 4" Base Dia, Zinc Pad, Zinc Stud

O-Ring: 1.938" ID x 2.125" OD, 0.103" Thick, Dash 135, Viton 3/32" Thick, Durometer 75?5, -15 to 400°F

5/16-18 Stem, 0.98" Knob Diam, 1/4" Shaft Diam, Type C Gear Lever with Taper End 0.51" Thread Length, 3.46" Handle Length, Stainless Steel Shaft, Phenolic Knob

Plate-Type Vibration Mounts; Axial Load Capacity: 60 (Pounds); Radial Load Capacity: 15.000 (Pounds); Height above Support: 1.000 (Decimal Inch)

O-Ring: 7/8" ID x 1" OD, 1/16" Thick, Dash 020, Viton Round Cross Section

Threaded Stud Adjustable Clamping Handle: 5/16-18 Thread, 0.71" Hub Dia, Zinc Die Cast with Stainless Steel Components 1.57" Stud Length

3-1/8" Head Diam, 3/8-16 Hole, 1.375" High, Glass Fibre Reinforced Technopolymer 3 Arm Knob 1-1/4" Hub Diam, 1.18 Head Height, Female Insert Style, 11/16 Hole Depth, Black

O-Ring: 13/16" ID x 1-1/16" OD, 1/8" Thick, Dash 211, Ethylene Propylene Diene Monomer Round Cross Section

O-Ring: 3/16" ID x 5/16" OD, 1/16" Thick, Dash 008, Viton Round Cross Section