L.S. STARRETT

25 Series AGD Group 2 Long Range Dial Indicators, 0-100 Dial, 2 in RangeFeaturesShockless, hardened steel gear trainFurnished with jewel bearings and lug-on-center backsFurnished with continuous...

25 Series AGD Group 2 Long Range Dial Indicators, 0-100 Dial, 5 in RangeFeaturesShockless, hardened steel gear trainFurnished with jewel bearings and lug-on-center backsFurnished with continuous...

25SC38 SPLIT COLLET ENGLISH THREAD 1/2-20NFFeatures9/32" (7-mm) thread length0.375" (9.5-mm) diameter through holeInternal collet fingers grip stem with equal pressure, eliminates spindle...

26 Series Improved Firm-Joint Outside Caliper, 12 in, Flat LegFeaturesAn improved joint, designed so the tension can be adjustedThe legs are made from a high-grade steelTension does not change with...

26 Series Improved Firm-Joint Outside Caliper, 18 in, Flat LegFeaturesAn improved joint, designed so the tension can be adjustedThe legs are made from a high-grade steelTension does not change with...

26 Series Improved Firm-Joint Outside Caliper, 24 in, Flat LegFeaturesAn improved joint, designed so the tension can be adjustedThe legs are made from a high-grade steelTension does not change with...

26 Series Improved Firm-Joint Outside Caliper, 6 in, Flat legFeaturesAn improved joint, designed so the tension can be adjustedThe legs are made from a high-grade steelTension does not change with...

269A TAPER GAGE .100-.50FeaturesLocking device fixes any leaf in positionTempered-steel constructionFor determining hole sizes in dies and other kinds of work

27 Series Improved Firm-Joint Inside Caliper, 12 in, Flat LegFeaturesAn improved joint, designed so the tension can be adjustedThe legs are made from a high-grade steelTension does not change with...

27 Series Improved Firm-Joint Inside Caliper, 18 in, Flat LegFeaturesAn improved joint, designed so the tension can be adjustedThe legs are made from a high-grade steelTension does not change with...

27 Series Improved Firm-Joint Inside Caliper, 6 in, Flat LegFeaturesAn improved joint, designed so the tension can be adjustedThe legs are made from a high-grade steelTension does not change with...

274 Series Inside Caliper, 0 to 6 in, Solid Nut, Round LegFeaturesFulcrum stud is hardened and the bearing surfaces of the legs are large enough to prevent any side deflectionThe bow spring is strong...

277 Series Divider, 0 to 6 in, Solid Nut, Round LegFeaturesSolid nutStrong, flexible bow springFulcrum stud is hardenedBearing surfaces of legs are large enough to prevent any side...

3020 Series Toolmakers' Square Sets, Stainless Steel, No Grad, 4 SquaresFeaturesSquareness accuracy to .0002" (0.005mm) for every 6" (150mm)Beam machined at the inner corner for clearance

3020 Series Toolmakers' Squares, 1 31/32 in x 3 in, Stainless SteelFeaturesSquareness accuracy to .0002" (0.005mm) for every 6" (150mm)Beam machined at the inner corner for clearance