Kanebridge Corporation

1 INCH STRUCTURAL WASHERS F 436 1 PLAIN.

#10 FLAT WASHER STEEL ZINC SAE 50 LBS.. #10 S A E FLAT WASHER ZINC. FLAT HEAD SCREWS ARE USED WHEN PROTRUSION OF THE FASTENER ABOVE THE MATING SURFACE IS UNACCEPTABLE. TYPICALLY 100 DEGREE FLAT OR...

10X3/4 SIX LOBE PAN SELF TAPPING SCREW TYPE A FULLY THREADED 18 8 STAINLESS STEEL. TYPE A THREAD FOR SELF STARTING IN THIN (.015 - .050 INCH THICK) METAL OR RESIN-FILLED PLYWOOD. PAN HEAD SCREWS ARE...

12X1 1/4 PHILLIPS FLAT FULL BODY 2/3 THREAD WOOD SCREW ZINC. WOOD SCREWS PRODUCE A MATING THREAD WHEN ASSEMBLED INTO WOOD OR OTHER RESILIENT MATERIALS. FLAT HEAD SCREWS ARE USED WHEN PROTRUSION OF...

4X1/2 PHILLIPS OVAL SELF TAPPING SCREW TYPE A B FULLY THREADED 18 8 STAINLESS. TYPE AB THREAD FOR USE IN THE THINNER SHEET METAL LIKE USED IN APPLIANCES. OVAL HEAD SCREWS ARE PREFERRED OVER A FLAT...

8 COUNTERSUNK FINISHING WASHER BLACK OXIDE.

8X2 PHILLIPS FLAT FULL BODY 2/3 THREAD WOOD SCREW ZINC. WOOD SCREWS PRODUCE A MATING THREAD WHEN ASSEMBLED INTO WOOD OR OTHER RESILIENT MATERIALS. FLAT HEAD SCREWS ARE USED WHEN PROTRUSION OF THE...

8X2 1/4 PHILLIPS MODIFIED TRUSS HEAD SELF DRILLING SCEW FULL THREAD ZINC BAKE. SELF DRILLING SCREWS HAVE POINT TO CUT THROUGH MATERIAL AND ELEIMINATE THE NEED TO DRILL A PILOT HOLE. TRUSS HEAD SCREWS...

8X3/4 SQUARE DRIVE PAN HEAD SELF DRILLING SCREW FULL THREAD 410 STAINLESS STEEL. SELF DRILLING SCREWS HAVE POINT TO CUT THROUGH MATERIAL AND ELEIMINATE THE NEED TO DRILL A PILOT HOLE. PAN HEAD SCREWS...

1 1/4-12 THIN PATTERN NYLON INSERT HEX LOCK NUT FINE THREAD ZINC YELLOW. HEX HEAD SCREWS ARE DESIGNED TO BE DRIVEN BY A WRENCH OR PNEUMATIC TOOLS.

1-8X4 HEX TAP BOLT GRADE 8 FULLY THREADED ZINC YELLOW. HEX HEAD SCREWS ARE DESIGNED TO BE DRIVEN BY A WRENCH OR PNEUMATIC TOOLS.

1/2-13 SERRATED FLANGE HEX LOCK NUTS CASE HARDENED HR15N 78/90 ZINC BAKE. HEX HEAD SCREWS ARE DESIGNED TO BE DRIVEN BY A WRENCH OR PNEUMATIC TOOLS.

1/4-20 NTE THIN PATTERN NYLON INSERT HEX LOCK NUT 18 8 STAINLESS STEEL. HEX HEAD SCREWS ARE DESIGNED TO BE DRIVEN BY A WRENCH OR PNEUMATIC TOOLS.

1/4-20X1 1/4 SELF CLINCHING STUD FULL THREAD HARDENED STEEL HEAT ZINC BAKE. CONCRETE SCREWS CUT THEIR OWN THREADS WHEN USED IN CONCRETE BLOCK OR BRICK. CARBIDE BITS ARE RECOMMENDED FOR USE IN MASONRY.

1/4X1 1/4 ROUND HEAD SPLIT DRIVE ANCHOR ZINC.