Jigsaws

FRL Combination Unit: 3/4 NPT, Standard, 1 Pc Filter/Regulator with Pressure Gauge 235 SCFM, 150 Max psi, Polycarbonate Bowl, Manual Drain

Time Delay Relay On Delay, 10 to 180 Seconds Timing Range, Subbase Mount

Plain Cam Follower: 1.5" Roller Dia, 0.875" Roller Width, 0.875" Stud Dia, 1-1/2" Stud Length 7/8-14 Thread Size, 3/4" Thread Length, 5,330 lb Dynamic Load, Steel Roller

60 Mesh, 95 LPM, 25 GPM, 2" Diam, Male/Female Tank Mounted Strainer 2 x 1-1/4 Port NPT, 9.6" Long

Flanged Cam Follower: 1.75" Roller Length, 1.75" Stud Length 2.43 mm Flange Dia, Steel Roller

Miniature Ball Bearing: 0.0937" Bore Dia, 0.1875" OD, 0.0937" OAW 1 Row, 10 lb Static Load Capacity, 31 lb Dynamic Load Capacity, Bearing Number SRW133ZZ

Round Linear Shafting: 0.75" Dia, 18" OAL, Steel Un-Hardened

Hydraulic Control Valve: 1/2" Inlet, 1/2-14 Thread, 15 GPM, 2,000 Max psi 3.44" OAL, Brass

7/8" Bore, 3/16" Keyway Width x 3/32" Keyway Depth, Type QT Sprocket Bushing 1.625 to 2.5" OD, 1,750 In/Lb Torque

Sleeve Bearing: 1/4" ID, 1/2" OD, 1/2" OAL, Oil Impregnated Bronze 1/2" OAL

Spur Gear: 60 Teeth, 1/4" Bore Dia Acetal

Shaft Collar: One Piece Split Shaft, 3-7/8" OD, Steel 3-7/8" Outside Diam, 7/8" Wide

0.7 CV Flow Rate, Single Solenoid Pilot Operated Valve 5 Port, 2 Position, Spring Return, 1/4" Push to Connect Inlet, 24 V

Finished Bore Sprocket: 18 Teeth, 5/8" Pitch, 1-7/16" Bore Dia, 2.875" Hub Dia 3.92" OD

QD Sprocket: 26 Teeth, 3/4" Pitch, 2-5/8" Bore Dia 6.63" OD

2-3/8" Max Bore Diam, 5/8" x 5/16" Keyway Width x Depth, Flexible Coupling Hub 8-5/8" OD, 7.13" OAL, Cast Iron