Iscar

SGIH Double End Right Hand Indexable Cutoff Blade 32mm High x 8mm Wide x 150mm OAL, 0.375" Insert Width, Series Self Grip

Indexable Grooving-Cutoff Toolholder: DGTL 2020-3, 3 to 3.18 mm Groove Width, 17.5 mm Max Depth of Cut, Left Hand Uses DG.. Inserts, 20 x 20 mm Shank, Series Do-Grip

Indexable Grooving-Cutoff Toolholder: TGTR2020-3JHP, 2.8 to 3.5 mm Groove Width, 27 mm Max Depth of Cut, Right Hand Uses TAG Inserts, 20 x 20 mm Shank, Through Coolant, Series Tang-Grip

Tool Block Style TGTBU, 32mm Blade Height, 110mm OAL, 49.4mm OAH, Indexable Cutoff Blade Tool Block 25mm Shank Height, 23mm Shank Width, Through Coolant, Series JetHPLine

Indexable Grooving-Cutoff Toolholder: PCHLS25.4-24, 0.77 mm Max Depth of Cut, Left Hand Uses Penta Inserts, Series PentaCut

Indexable Grooving Blade: Right Hand, 0.1181" Min Width 0.59" Max Workpiece Dia, Uses GRIP, GRIP (Full Radius), HGN-C, HGN-J & HGN-UT Inserts

Indexable Grooving Blade: 1.2598" High, Left Hand, 0.1181" Min Width 1.1811" Max Workpiece Dia, Uses GRIP, HGN-C, HGN-J, HGN-UT & HGPL Inserts

Indexable Grooving Blade: 1.2598" High, Left Hand, 0.1969" Min Width 7.874" Max Workpiece Dia, Uses HFPR/L Inserts

Cutoff & Grooving Support Blade for Indexables: Right Hand, 0.1969" Insert Width, Series Heli & Modular Grip 0.7874" Max Depth of Cut

Indexable Grooving Blade: 2.0709" High, Neutral, 0.3937" Min Width 3.937" Max Depth of Cut, Uses GDMY (Full Radius), GDMY-F, GDPY, GIF-E (W=8, 10 Full Radius) & GIF-E (W=8, 10) Inserts

15mm Min Bore, 6mm Max Depth, Left Hand GEHI Indexable Boring Bar 150mm OAL, 12mm Shank Diam, Uses GE.I, GEHI Inserts, Through Coolant

0.7" Cut Diam, 0.394" Max Depth, 3/4" Shank Diam, Weldon Shank, 3.38" OAL, Indexable Square-Shoulder End Mill 90° Lead Angle, Through Coolant, Series Heli2000

Indexable Thread Mill: 0.8268" Cut Dia, 1.5748" Max Hole Depth, Internal & External 0.7874" Shank Dia, Through Coolant

Indexable High-Feed Face Mill: 1.02 to 1.5" Cut Dia, 0.5" Arbor Hole Takes (4) H600 WXCU Insert, Through Coolant

45° Lead Angle, 6mm to 14.1mm Cut Diam, 12mm Shank Diam, Indexable & Chamfer End Mill Takes 1 Insert, X/Q/SOMT 06 Insert Style, E45X Toolholder, 80mm OAL, 4mm Max Depth of Cut