Indexable Threading

3/8 Inch Compatible Head Diameter, 0.381 Inch Shank Diameter, 0.286 Inch Square, 3-15/16 Inch Overall Length, Replaceable Tip Thread Forming Tap 1.575 Inch Max Tapping Depth

Indexable Threading Toolholder: External, Left Hand, 1 x 1" Shank 0.375" Insert Inscribed Circle, Series Laydown Jet-Stream

Indexable Threading Toolholder: External, 1" Shank 1" Shank, Uses 16ER Inserts

Knurl Carrier Blocks (Heads); Number of Knurls Held: 1; 2 ; Length to Knurl Hole Center (mm): 25.40

Convex Knurl Wheel: 5/8" Dia, 90 ° Tooth Angle, 20 TPI, Straight, Cobalt 1/4" Face Width, 1/4" Hole, Series GKV

Beveled Face Knurl Wheel: 1" Dia, 90 ° Tooth Angle, 25 TPI, Straight, High Speed Steel 1/4" Face Width, 1/2" Hole, Series SW4

Standard Knurl Wheel: 3/4" Dia, 90 ° Tooth Angle, 25 TPI, Straight, High Speed Steel 3/8" Face Width, 1/4" Hole, Series MK

Conductive Pen: 8.5 g Pen 71.40 ° Flash Point, Flammable, Safe for Most Plastics

Knurl Wheel: 70 ° Tooth Angle, 60 TPI 3/16" Face Width, 3/16" Hole

Convex Knurl Wheel: 1/2" Dia, 90 ° Tooth Angle, 30 TPI, Diagonal, Cobalt 3/16" Face Width, 3/16" Hole, 30 ° Helix, Series EPV

Standard Knurl Wheel: 0.394" Dia, 90 ° Tooth Angle, 32 TPI, Straight, High Speed Steel 0.157" Face Width, 0.157" Hole, Series MM

Standard Knurl Wheel: 3/4" Dia, 90 ° Tooth Angle, 16 TPI, Straight, High Speed Steel 0.197" Face Width, 0.25" Hole, Series R

Standard Knurl Wheel: 1" Dia, 90 ° Tooth Angle, 14 TPI, Straight, High Speed Steel 3/8" Face Width, 5/16" Hole, Series OU

Beveled Face Knurl Wheel: 1/2" Dia, 90 ° Tooth Angle, 36 TPI, Diagonal, Cobalt 3/16" Face Width, 3/16" Hole, 96 Diametral Pitch, 30 ° Helix, Series EP

Standard Knurl Wheel: 1/2" Dia, 90 ° Tooth Angle, 25 TPI, Diagonal, High Speed Steel 3/16" Face Width, 3/16" Hole, 30 ° Helix, Series EP

Standard Knurl Wheel: 5/8" Dia, 90 ° Tooth Angle, 24 TPI, Straight, High Speed Steel 1/4" Face Width, 1/4" Hole, Series GK