Hose, Tube, Fittings & Valves

Indexable Profiling Toolholder: Internal, 5 ° Lead Angle 5/8" Shank, 0.9" Min Hole Dia, 10" OAL, Uses NP.., Series Top Notch Profiling Boring Bar

19.56mm Min Bore, Left Hand E-SCLP Indexable Boring Bar 254mm OAL, 5/8" Shank Diam, -5° Lead Angle, Uses CP.., E-SCLP Inserts, Through Coolant

4-1/2" Max Drill Depth, 3xD, 1-1/2" Diam, Indexable Insert Drill Drill Style SD523, Takes 2 Inserts, 1-1/2" Shank Diam, Straight Shank

2.85236" Max Drill Depth, 3xD, 23mm Diam, Indexable Insert Drill Drill Style 880..Cx-03, Takes 2 Inserts, 40mm Shank Diam, Modular Connection

177.8mm Max Drill Depth, 4xD, 1-3/4" Diam, Indexable Insert Drill Drill Style DFT, Takes 2 Inserts, 1-1/2" Shank Diam, Straight Shank

Replaceable Tip Milling Shank: Series Coromant EH, 80 mm Projection, 16 mm Straight Shank E16 Neck Thread, 0.6063" Neck Dia, 135 mm OAL, Steel

4.2" Max Drill Depth, 2xD, 2" Diam, Indexable Insert Drill Drill Style A880..LXxx-02, Takes 2 Inserts, 1-1/2" Shank Diam, Straight Shank

Indexable High-Feed End Mill: 1.125" Straight Shank Uses 3 XDLT0904 Inserts, 0.059" Max Depth, 9.843" OAL

3.67087" Max Drill Depth, 5xD, 18mm Diam, Indexable Insert Drill Drill Style 880..L-05, Takes 2 Inserts, 25mm Shank Diam, Straight Shank

2" Max Drill Depth, 2xD, 1" Diam, Indexable Insert Drill Drill Style SD522, Takes 2 Inserts, 1-1/4" Shank Diam, Straight Shank

Boring Bar

3-3/4" Max Drill Depth, 2xD, 1-7/8" Diam, Indexable Insert Drill Drill Style SD522, Takes 2 Inserts, 1-1/2" Shank Diam, Straight Shank

1/2" Drive, 18.00 Volt, Straight Cordless Impact Wrench 0-1700 RPM, 1400 Ft/Lb, Includes M18 FUEL w/ ONE-KEY High Torque Impact Wrench 1/2" Friction Ring (2863-20), (2) M18 REDLITHIUM XC5.0 Resistant Battery Pack (48-11-1850R), M18 and M12 Multi-Voltage...

Solenoid Valve: Normally Closed, Polyvinylchloride, Viton Seal, 120/60V

1/2" ID x 0.93" OD, 4,000 psi Work Pressure Hydraulic Hose Synthetic Rubber, -40°F to 257°F

3/8" ID x 3/4" OD 500' Long Multipurpose Air Hose 225 Working psi,