Hand & Body Soaps & Sanitizers

Square End Mill: 10 mm Dia, 22 mm LOC, 4 Flutes, Solid Carbide 100 mm OAL, 10 mm Shank Dia, 50 ° Helix, Single End, TiAlN Coated, Series CoroMill Plura

Ball End Mill: 0.0394" Dia, 0.0394" LOC, Solid Carbide 80 mm OAL, 6 mm Shank Dia, 30 ° Helix, TiAlN Coated, Series CoroMill Plura

Square End Mill: 1/4'' Dia, 5/8'' LOC, 3/8'' Shank Dia, 2-7/16'' OAL, 4 Flutes, Cobalt Single End, AlTiN Finish, Spiral Flute, Centercutting, RH Cut, RH Flute

Corner Radius End Mill: 5/16" Dia, 13/16" LOC, 0.045" Radius, 4 Flutes, Solid Carbide 2-1/2" OAL, 5/16" Shank Dia, Bright/Uncoated, Single End, Centercutting, Series Carbide Triple Crown

Ball End Mill: 4.00 mm Dia, 14.00 mm LOC, 4 Flute, Solid Carbide 51.00 mm OAL, 4.00 mm Shank Dia, 35 deg Helix, TiAlN Coated, Single End, Series HP441BN

Corner Radius End Mill: 0.8 mm Dia, 0.65 mm LOC, 0.2 mm Radius, 2 Flutes, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 30 ° Helix, WXS Coated, Single End, Series 4592

Ball End Mill: 0.75" Dia, 1.625" LOC, 2 Flute, Powdered Metal 3-7/8" OAL, 3/4" Shank Dia, 30 ° Helix, Uncoated, Single End, Series 621

Tapered End Mill: 5 ° per Side, 3/16" Small Dia, 3" LOC, 3 Flutes, Cobalt, Square End 3/4" Shank Dia, 5-1/4" OAL, Uncoated, Series 595

Tapered End Mill: 7 ° per Side, 3/32" Small Dia, 1-1/2" LOC, 3 Flutes, Cobalt, Square End 1/2" Shank Dia, 3-1/2" OAL, Uncoated, Series 596

Corner Radius End Mill: 0.5 mm Dia, 0.4 mm LOC, 0.05 mm Radius, 2 Flutes, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 30 ° Helix, WXS Coated, Single End, Centercutting, Series 4592

Square End Mill: 0.375" Shank Dia, 2.5" OAL, 4 Flutes, Cobalt Single End, Right Hand Flute, Right Hand Cut,

Roughing End Mill:

Corner Radius End Mill: 3 mm Dia, 2.5 mm LOC, 0.2 mm Radius, 2 Flutes, Solid Carbide 60 mm OAL, 6 mm Shank Dia, 30 ° Helix, WXS Coated, Single End, Series 4592

Corner Radius End Mill: 0.4 mm Dia, 0.3 mm LOC, 0.05 mm Radius, 2 Flutes, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 30 ° Helix, WXS Coated, Single End, Series 4592

Corner Radius End Mill: 0.4 mm Dia, 0.3 mm LOC, 0.1 mm Radius, 2 Flutes, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 30 ° Helix, WXS Coated, Single End, Series 4592

Corner Radius End Mill: 0.4 mm Dia, 0.3 mm LOC, 0.1 mm Radius, 2 Flutes, Solid Carbide 50 mm OAL, 4 mm Shank Dia, 30 ° Helix, WXS Coated, Single End, Series 4592