Grinding & Buffing Machines

5/16-18 Thread, 7/8" OD, 3/4" High, Jig Foot Black Oxide Finish, Low Carbon Steel, Case Hardened, 75-77 R30N Heat Treatment

Threaded Ball Plunger: M12 x 1.75, 0.315" Ball Dia, 0.866" Body Length, 0.098" Max Ball Reach 2.25 lb Initial End Force, 4.5 lb Final End Force, Stainless Steel Body, Stainless Steel Ball, Locking Element

10-32 Thread, 1/2" Diam, 1/2" High, Threaded, 4-Point Tooth Grade Diamond Serration Tooth Pattern, Solid Carbide, Round Positioning Gripper 3/16" Flat Width, Uncoated

Threaded Spring Plunger: #10-32, 0.468" Thread Length, 0.093" Dia, 0.065" Projection 0.75 lb Initial End Force, 2.5 lb Final End Force, Steel Body, Locking Element

Threaded Spring Plunger: 1/8, 2-13/32" Thread Length, 0.499" Dia, 1/2" Projection 16 lb Initial End Force, 68 lb Final End Force, Steel Body, Locking Element

1/2-13, 0.41" Thread Length, 0.31" Plunger Diam, 0.38" Plunger Projection, 1 Lb Init to 4 Lb Final End Force, Stainless Steel Pull Ring Plunger 0.56" Len Under Head, 0.81" Body Len, 1" Ring Diam, 1.06" Plunger Len, 1/2" Hex, 1/4" Head Height

5/8-11, 1.07" Thread Length, 0.38" Plunger Diam, 0.75 Lb Init to 2.5 Lb Final End Force, Steel L Handle Plunger 1.88" Body Length, 1-1/4" Length Under Head, Locking Element, 1/2" Plunger Projection

Threaded Spring Plunger: M8 x 1.25, 25 mm Thread Length, 3.43 mm Dia, 5 mm Projection 2.98 lb Initial End Force, 14.88 lb Final End Force, Steel Body

M12x1.75, 0.43" Thread Length, 0.31" Plunger Diam, 0.38" Plunger Projection, 1 Lb Init to 4 Lb Final End Force, Stainless Steel Pull Ring Plunger 0.56" Len Under Head, 0.81" Body Len, 1" Ring Diam, 1.06" Plunger Len, 12mm Hex, 1/4" Head Height, Locking...

1/4-28 Thread, 1" Diam, 3/8" High, Threaded, Extra Fine Tooth Grade Diamond Serration Tooth Pattern, High Speed Steel, Round Positioning Gripper 3/16" Flat Width, Black Oxide Coated

Threaded Spring Plunger: 1/2-13, 1-1/4" Thread Length, 1/4" Projection 2.7 lb Initial End Force, 9.3 lb Final End Force, Steel Body, Locking Element

5/8-11, 0.56" Thread Length, 0.38" Plunger Diam, 0.44" Plunger Projection, 1.25 Lb Init to 5 Lb Final End Force, Steel Pull Ring Plunger 0.69" Len Under Head, 1" Body Len, 1" Ring Diam, 1.31" Plunger Len, 0.62" Hex, 0.31" Head Height, Locking Element

Threaded Spring Plunger: 1/4-20, 3/4" Thread Length, 0.118" Dia, 1/8" Projection 2 lb Initial End Force, 9 lb Final End Force, Stainless Steel Body

Threaded Ball Plunger: M6 x 1, 0.137" Ball Dia, 0.551" Body Length, 0.039" Max Ball Reach 0.45 lb Initial End Force, 1.35 lb Final End Force, Stainless Steel Body, Stainless Steel Ball

Shoulder Tooling Ball: Inspection, 1/2" Ball Dia, 1/4" Shank Dia, Slip-Fit 0.5" Ball Center to Shoulder Bottom, 1-3/8" Ball Center to Shank Bottom, Steel

3/8-16, 0.62" Thread Length, 1/4" Plunger Diam, 0.25 Lb Init to 1.25 Lb Final End Force, Steel Locking L Handle Plunger 1.13" Body Length, 3/4" Length Under Head, 0.3" Plunger Projection