GENERAL TOOLS

SET OF 3 PLUG CUTTERS3/8 1/2 5/8"FeaturesCutter will produce and eject plugs from stock up to 3/4" thickness

Sheet Metal Gage, SteelFeaturesFor gaging uncoated sheet metal, plate iron, and steelGage numbers are U.S. standard 0 to 36, based on weights in ounces per square inchDecimal equivalents of each size...

Single Bar Marking Gauges, 1/6 in @ 1 in, Nickel PlatedFeaturesDie-cast headNeedlepoint marker is replaceable

Slide Caliper, 0 to 4 in, Stainless SteelFeaturesHandy pocket slide caliper with inside and outside reading in 16ths and 32ndsDecimal equivalents table on back

Stainless Steel Protractor, 6 in, Round HeadFeaturesAdjustable protractor arm locks into desired position with knurled thumb nutPermanently etched graduations from 0 to 180º in opposite directions

Stainless Steel Protractor, 6 in, Square HeadFeaturesAdjustable protractor arm locks into desired position with knurled thumb nutPermanently etched graduations from 0 to 180º in opposite directions

Standard Cutters, 1/8 in-1 1/8 inFeaturesCutter wheel is hardened tool steelHardened steel reamer slides and locks in placeRollers, flare groove

Steel Automatic Center Punch Replacement Points, For #79 Mini HD Center PunchFeaturesReplacement Point for #79 Mini Heavy-duty Automatic Center PunchMade of hardened steel

Steel Automatic Center Punches, 5 in, SteelFeaturesOne-handed spring impact operation; no hammer needed.Spring tension adjusts for light or heavy strokes and marking.All-steel body with knurled...

Straight Leaf Feeler Gauge, 26 Leafs, 3 in L x 1/2 in W, 0.0015 in to 0.025 in Leaf ThicknessFeaturesKnurled locking nutEach leaf is etched with both decimals of an inch and corresponding millimeter...

Swivel Head Deburring Tool, Metal Handle, 5-1/8 in LFeaturesSwivel head provides easy deburring of round and uneven surfacesUse tool to remove leftover burrs from cut pipe, tubing, conduit, and PVC...

Swivel Head Pin Vises, 1/8 in Pipe Cap, SteelFeaturesThe #92 Swivel-head Pin Vise facilitates precise work on models, instruments and jewelryHardened collet opens to desired size

Tap Wrench, 2-3/4 in Length, No. 0 to 1/4 in Tap SizeFeaturesSelf-centering hardened steel jaws and knurled chuck sleeve provide a positive gripThe sliding T-handle fits into tight spaces while...

Tap Wrench, 3-3/4 in Length, No. 12 to 1/2 in Tap SizeFeaturesSelf-centering hardened steel jaws and knurled chuck sleeve provide a positive gripThe sliding T-handle fits into tight spaces while...

Telescoping Alligator Clips, 6 1/4 lb, 6 1/4 in - 24 1/2 inFeaturesConvenient pocket clipChrome finish to prevent rustJaw capacity: .170" (4.3mm)