Gasketing & Packaging

Turning Insert: DCMT2151GK CA6515, Solid Carbide TiCN, Al2O3 & TiN Coated, Neutral, 1/4" Inscribed Circle, 1/64" Corner Radius, 55 ° Diamond, Series ISOI

Gasket Sheet: 36" OAW, 1/16" Thick, 36" OAL, Neoprene 250 ° F

Packing Tools; Overall Length (Inch): 60in

Turning Insert: WNMG 433 T9225, Solid Carbide TiN, TiCN, Al2O3 & TiN Coated, Neutral, 0.343" Long, 1/2" Inscribed Circle, 0.0469" Corner Radius, 80 ° Trigon, Series T9200

Turning Insert: CCMT21.51-F1 TM2501, Solid Carbide TiCN & Al2O3 Coated, Neutral, 1/4" Inscribed Circle, 1/64" Corner Radius, 80 ° Diamond, Series CCMT

Turning Insert: TPG222 K68, Solid Carbide Uncoated, Neutral, 11 mm Long, 1/4" Inscribed Circle, 1/32" Corner Radius, 60 ° Triangle, Series KENDEX

RH MCLN Negative Rake Indexable Turning Toolholder 5° Lead Angle, 1-1/4" x 1-1/4" Shank, Takes CN..64. Inserts

RH SDJC 0° Neutral Rake Indexable Turning Toolholder 3° Lead Angle, 1" x 1" Shank, Takes DC..32.5. Inserts

Spade Drill Insert: 7/8" Dia, Seat Size 1, High Speed Steel, 132 ° Point TiN Coated, Series T-A

Turning Insert: TCMT222-MM 2220, Solid Carbide TiCN, AI2O3 & TiN Coated, Neutral, 1/4" Inscribed Circle, 1/32" Corner Radius, 60 ° Triangle, Series CoroTurn 107

Milling Insert: APKT 1604PDR-HM, IC20, Solid Carbide Uncoated, 5.25 mm Thick, 9.45 mm Wide

Milling Insert: P26335R14 WSM35S WSM35S, Solid Carbide TiAlN, Al2O3 & Al Coated, 5/32" Thick, 0.1560 " Thick, 0.3750" Wide

Turning Insert: LNMX 150616L-HT IC908, Solid Carbide TiAlN Coated, Left Hand, 15 mm Long, 1/16" Corner Radius, 90 ° Rectangle, Series Heliturn

Grooving Insert: N151.3304G H13A, Solid Carbide Uncoated, Neutral, 0.1181" Cutting Width, Series T-Max Q-Cut

0.208" Min Bore, 1" Max Depth, Right Hand Indexable Boring Bar 2-1/4" OAL, 3/8" Shank Diam, 5° Lead Angle, Uses CDC

LH SCLC 0° Neutral Rake Indexable Turning Toolholder 5° Lead Angle, 1/2" x 1/2" Shank, Takes CC..21.5. Inserts